LST0500-ST-F

Connectorized ELEDS Technical Data LST0X00 Features Industry Standard FC and ST® Connectors 1300 nm Wavelength Linewidth <110 nm High Reliability Range of Flange Options -40°C to +80°C Operation Description The LST range of products includes a wide variety of connectorized ELED emitters for both single mode and multimode operation. The products have been developed for low cost and wide operating temperature applications such as telecom FITL and datacom FDDI LANS. Variants are available in industry standard connector types with a selection of mounting flange options. The product range features a high reliability ridge waveguide ELED manufactured using our MOVPE process. The construction of the products includes a hermetically sealed ELED and is designed to be compatible with the environmental requirements of the Bellcore TA-TSY-000983 document. Applications Optical Data Communication Transmitters E-O Convertors LANS FDDI Networks FITL Single Mode: LST0400 Multimode: LST0500 5963-5305E (12/94) 487 Absolute Maximum Ratings Absolute maximum limits mean that no catastrophic damage will occur if the product is subjected to these ratings for short periods, provided each limiting parameter is in isolation and all other parameters have values within the performance specification. It should not be assumed that limiting values of more than one parameter can be applied to the product at the same time. Limits Parameter Forward Current Reverse Voltage Operati...