45ns / Ultra Low Power / Low Voltage / Rail-to-Rail Input Comparator
LMV7235/LMV7239 45 nsec, Ultra Low Power, Low Voltage, Rail-to-Rail Input Comparator with Open-Drain/Push-Pull Output
F...
Description
LMV7235/LMV7239 45 nsec, Ultra Low Power, Low Voltage, Rail-to-Rail Input Comparator with Open-Drain/Push-Pull Output
February 2002
LMV7235/LMV7239 45ns, Ultra Low Power, Low Voltage, Rail-to-Rail Input Comparator with Open-Drain/Push-Pull Output
General Description
The LMV7235/39 are ultra low power, low voltage, 45ns comparators. They are guaranteed to operate over the full supply voltage range of 2.7V to 5V. These devices achieve a 45ns propagation delay while consuming only 65µA of supply current at 5V. The LMV7235/39 have a greater than rail-to-rail common mode voltage range. The input common mode voltage range extends 200mV below ground and 200mV above supply, allowing both ground and supply sensing. The LMV7235 features an open drain output. By connecting an external resistor, the output of the comparator can be used as a level shifter. The LMV7239 features a push-pull output stage. This feature allows operation without the need of an external pull-up resistor. The LMV7235/39 are available in the SC70-5 and SOT23-5 packages, which are ideal for systems where small size and low power is critical.
Features
(VS = 5V, TA = 25˚C, Typical values unless otherwise specified) n Propagation delay 45ns n Low supply current 65µA n Rail-to-Rail input n Open drain and push-pull output n Ideal for 2.7V and 5V single supply applications n Available in space saving packages: 5-pin SOT23-5 and 5-pin SC70-5
Applications
n n n n n n n Portable and battery powered systems Scanners Set ...
Similar Datasheet