Digitizer Controller
Ordering number : EN*5560B
CMOS LSI
LC19001A010
Digitizer Controller
Preliminary Overview
The LC19001A010 provides rap...
Description
Ordering number : EN*5560B
CMOS LSI
LC19001A010
Digitizer Controller
Preliminary Overview
The LC19001A010 provides rapid and precise position detection for the resistive membrane pressure-sensitive digitizers used in PDAs and other portable informationprocessing equipment. It implements, in a single chip, the coordinate readout processing required for pen input operations. This controller provides the following functions: digitizer voltage A/D conversion, noise exclusion, conversion to display coordinates, and data transfer to the host CPU.
Package Dimensions
unit: mm 3326-LQFP80
[LC19001A010]
Features
Detects input coordinate values from resistive membrane pressure-sensitive digitizers at readout speeds up to 190 points per second using a 10-bit A/D converter. Compact size, low power, and the 3.3 V power supply operation appropriate for PDAs and other portable information-processing equipment Menu area registration, duplicate coordinate processing, and 4-byte packets reduce the host CPU processing load. Logical exclusion of abnormal coordinates and averaging processing to remove both pen chattering noise and noise from the LCD system Controller functions can be programmed by sending command data from the host CPU.
SANYO: LQFP80
SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquarters
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110 JAPAN
O3096HA (OT) No. 5560-1/8
LC19001A010 Pin Assignment
Block Diagram
No. 5560-2/8
LC19001A010 Pin ...
Similar Datasheet