Ordering number: EN*5825
Monolithic Digital IC
LB8118M Actuator Driver for Portable CD Players Preliminary Overview
Th...
Ordering number: EN*5825
Monolithic Digital IC
LB8118M Actuator Driver for Portable CD Players Preliminary Overview
The LB8118M is an actuator driver IC designed for portable CD players that operate at 2.4 V (two Ni-Cd batteries) or 3.0 V (two dry cells). Because the four-channel driver control outputs are divided into two groups, this device reduces power dissipation considerably during double-speed play.
Package Dimensions
unit : mm
3148-QFP44MA
[LB8118M]
Functions and Features
SANYO : QIP44MA
. H bridge drivers (output dynamic range maximum is about 2 V) on chip for four channels to drive each CD actuator (the focus the tracking coil, the spindle motor, and the sled motor). . coil, Step-up circuit (voltage to be set by an external resistor) on chip that is used to apply voltage to the CD DSP, ASP and . . . . . . . . . . . .
microcontroller. Center-tap coil for step-up circuit makes it possible to supply the driver control voltage. (However, the drive Tr, L, C, and Di are all external.) Oscillator circuits for each converter on chip. (C is external.) Four-channel driver control output is divided into two groups (the focus/tracking group and the spindle/sled group) for minimum loss at double-speed playback. Highest operating voltage detected in each group is supplied for each 2ch H bridge driver after PMW conversion. The single channel PWM drive without dividing the outputs into two groups is also possible. (However, the PWM
PNP-Tr,
NPN-Tr, L, C, and Di are all extern...