FDD Spindle Motor Driver
Ordering number : EN5383
Monolithic Digital IC
LB1910
FDD Spindle Motor Driver
Overview
The LB1910 is a 3-phase disc ...
Description
Ordering number : EN5383
Monolithic Digital IC
LB1910
FDD Spindle Motor Driver
Overview
The LB1910 is a 3-phase disc drive motor driver that is optimal for use as a 3.5-inch FDD spindle motor driver.
Package Dimensions
unit: mm 3222-HSOP28
[LB1910]
Functions and Features
Three-phase full-wave linear driver Digital speed control circuit Start and stop circuits (active low) RPM switching H: 300 rpm L: 360 rpm Current limiter circuit Built-in index comparator Thermal shutdown circuit
SANYO: HSOP28
Specifications
Absolute Maximum Ratings at Ta = 25°C
Parameter Maximum supply voltage Maximum output current Maximum steady-state output current Allowable power dissipation Operating temperature Storage temperature Symbol VCC max IO max1 IO max2 Pd max Topr Tstg Independent IC t ≤ 0.5 s Conditions Ratings 7.0 1.0 0.7 0.5 –20 to +80 –40 to +150 Unit V A A W °C °C
Allowable Operating Ranges at Ta = 25°C
Parameter Recommended supply voltage Symbol VCC Conditions Ratings 4.2 to 6.5 Unit V
SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquarters
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110 JAPAN
43096HA (OT) No. 5383-1/7
LB1910
Electrical Characteristics at Ta = 25°C, VCC = 5 V
Parameter Current drain SL bias current SL input low-level voltage SL input high-level voltage S/S bias current S/S low-level voltage S/S high-level voltage Hall amplifier input bias current Common-mode input voltage range Differential input voltage range Hall bias ...
Similar Datasheet