I-V Amplifier
Ordering number : EN5307A
Monolithic Linear IC
LA6602V
I-V Amplifier for MiniDisc Drives
Features
• The LA6602V is op...
Description
Ordering number : EN5307A
Monolithic Linear IC
LA6602V
I-V Amplifier for MiniDisc Drives
Features
The LA6602V is optimal as an interface IC between the PD and servo ICs used in MD PU modules. Eight buffer amplifier channels On-chip low-noise high-bandwidth amplifier RF block
Package Dimension
unit: mm 3175A-SSOP24
[LA6602V]
Specifications
Maximum Ratings at Ta = 25°C
Parameter Maximum supply voltage Allowable power dissipation Operating temperature Storage temperature Symbol VCC max Pd max Topr Tstg Independent IC Conditions
SANYO: SSOP24
Ratings 13.0 300 –30 to +80 –40 to +125 Unit V mW °C °C
Operating Conditions at Ta = 25°C
Parameter Supply voltage Symbol VCC Conditions Ratings 3.6 to 12.0 Unit V
Operating Characteristics at Ta = 25°C, VCC /VEE = ± 2.5 V
Parameter Quiescent current [Amplifiers A through D] Output offset voltage Maximum output voltage Minimum output voltage Gain-bandwidth product [Amplifiers E and F] Output offset voltage Maximum output voltage Minimum output voltage Gain-bandwidth product [Amplifiers I and J] Output offset voltage Output offset voltage difference Maximum output voltage Minimum output voltage Gain-bandwidth product VIO VIO I-J VO max VO min fT RL = 2 kΩ, VIN = –1 V See Figure 3. RL = 2 kΩ, VIN = +1 V See Figure 4. 20 [dB] amp GV = 0 [dB] See Figure 4. 6 8 1.5 –1.5 See Figure 2. 20 3 50 7 mV mV V V MHz VIO VO max VO min fT See Figure 2. RL = 4.7 kΩ, VIN = –1 V See Figure 3. RL = 4.7 kΩ, VIN = +1 V See Figure 4. 20 [dB] amp GV =...
Similar Datasheet