E-Series I/Q Demodulator
E-Series I/Q Demodulator — 410 - 430 MHz
EKIN2-420DX
EKIN2-420DX
E-Series I/Q Demodulator 410 - 430 MHz
Features
• • ...
Description
E-Series I/Q Demodulator — 410 - 430 MHz
EKIN2-420DX
EKIN2-420DX
E-Series I/Q Demodulator 410 - 430 MHz
Features
Excellent Phase and Amplitude Balance LO Power +10 dBm Typical Surface Mount
SM-92 Package
Description
M/A-COM’s EKIN2-420DX is a passive, surface mount I/Q Demodulator. Ideally suited for Direct Demodulation in PMR/ TETRA applications.
Electrical Specifications @25°C
Parameter Frequency Range LO / RF 410 - 430 I/Q DC - 1 Units MHz MHz dB Degrees LO to RF LO to I/Q dB dB dB dBm Typical — — 0.5 2.0 55 42 6.4 +10 ± 1 Minimum — — — — 40 40 — — Maximum — — 1.0 3.0 — — 8.0 —
Amplitude Unbalance Phase Unbalance Isolation Conversion Loss (LO) Carrier Power
Q= -90° for RF>LO
V1.00
S 1377 B
M/A-COM Division of AMP Incorporated s North America: Tel. (800) 366-2266, Fax (800) 618-8883 s Asia/Pacific: Tel.+85 2 2111 8088, Fax +85 2 2111 8087 s Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020
www.macom.com
AMP and Connecting at a Higher Level are trademarks. Specifications subject to change without notice.
E-Series I/Q Demodulator — 410 - 430 MHz
EKIN2-420DX
Absolute Maximum Ratings
Parameter Operating Temperature Storage Temperature Impedance RF Power (1dB Compression) Absolute Maximum -10°C to +70°C -55°C to +100°C 50 Ohms Nominal 4 dBm Max
Functional Configuration
Function LO RF I Q External 50 Ohms Case Ground Not Connected Pin No. 1 8 5 6 — 3,4,7 —
Amplitude Unbalance
0.40
Phase Unbalance
100.00
0.35
95.00
0.30
90.00
0.25
85.00
0.20
d...
Similar Datasheet