EKIN2-220D

E-Series I/Q Demodulator — 215 - 225 MHz EKIN2-220D EKIN2-220D E-Series I/Q Demodulator 215 - 225 MHz Features Excellent Phase and Amplitude Balance LO Power +10 dBm Typical Surface Mount SM-7-1 Package Description M/A-COM’s EKIN2-220D is a passive, high performance surface mount Demodulator. It is ideally suited for IF demodulation in Cellular Base Stations. Typical system applications include GSM, DCS1800, W-CDMA and PCS. Electrical Specifications @25°C Parameter Frequency Range I/Q LO / RF 215 - 225 DC - 0.27 Units MHz MHz dB Degrees LO to RF dB dB dBm — Typical — — 0.3 1.0 — 6.0 +10 ± 1 — Minimum — — — — 50.0 — — — Maximum — — 0.5 1.5 — 7.0 — — Amplitude Unbalance Phase Unbalance Isolation Conversion Loss (LO) Carrier Power Q = I - 90 degrees for RF > LO V2.00 S 0699 E M/A-COM Division of AMP Incorporated s North America: Tel. (800) 366-2266, Fax (800) 618-8883 s Asia/Pacific: Tel.+85 2 2111 8088, Fax +85 2 2111 8087 s Europe: Tel. +44 (1344) 869 595, Fax+44 (1344) 300 020 www.macom.com AMP and Connecting at a Higher Level are trademarks. Specifications subject to change without notice. E-Series I/Q Demodulator — 215 - 225 MHz EKIN2-220D Absolute Maximum Ratings Parameter Operating Temperature Storage Temperature Impedance RF Power (1dB Compression) DC Offset Voltage Absolute Maximum -10°C to +70°C -55°C to +100°C 50 Ohms Nominal 2 dBm Max 2 mV Typ Functional Configuration Function LO RF I Q External 50 Ohms Case Ground Not Connected Pin No. 1 8 5 6 ...