Triple video output amplifier
INTEGRATED CIRCUITS
DATA SHEET
TDA6103Q Triple video output amplifier
Preliminary specification File under Integrated C...
Description
INTEGRATED CIRCUITS
DATA SHEET
TDA6103Q Triple video output amplifier
Preliminary specification File under Integrated Circuits, IC02 March 1994
Philips Semiconductors
Philips Semiconductors
Preliminary specification
Triple video output amplifier
FEATURES High bandwidth: 7.5 MHz typical; 60 V (peak-to-peak value) High slew rate: 1600 V/µs Simple application with a variety of colour decoders Only one supply voltage needed Internal protection against positive appearing Cathode-Ray Tube (CRT) flashover discharges One non-inverting input with a low minimum input voltage of 1 V Thermal protection Controllable switch-off behaviour. ORDERING INFORMATION EXTENDED TYPE NUMBER TDA6103Q BLOCK DIAGRAM
VDD 6 VDD MIRROR 2 VDD VDD VDD
TDA6103Q
GENERAL DESCRIPTION The TDA6103Q includes three video output amplifiers in one single in-line 9-pin medium power (SIL9MP) package SOT111BE, using high-voltage DMOS technology, intended to drive the three cathodes of a colour CRT.
PACKAGE PINS 9 PIN POSITION DBS9 MATERIAL plastic CODE SOT111BE
3x
TDA6103Q
VDD MIRROR 3
FLASHDIODE Voc (3x) 9,8,7 1x Vbias
CURRENT SOURCES
inverting input (3x)
1,2,3
LEVELSHIFTER 1
DIFFERENTIAL STAGE
LEVELSHIFTER 2
5
non-inverting input Vip
MIRROR 1
THERMAL PROTECTION
4 GND
MGA968
Fig.1 Block diagram (one amplifier shown).
March 1994
2
Philips Semiconductors
Preliminary specification
Triple video output amplifier
PINNING SYMBOL Vi1 Vi2 Vi3 GND Vip VDD Voc3 Voc2 Voc1 PIN 1 2 3 4 5 6 7 8 9...
Similar Datasheet