TDA3615J

INTEGRATED CIRCUITS DATA SHEET TDA3615J Multiple voltage regulator Preliminary specification File under Integrated Circuits, IC01 1998 Jun 23 Philips Semiconductors Preliminary specification Multiple voltage regulator FEATURES General Six voltage regulators Five microprocessor controlled regulators (regulators 2 to 6) Regulator 1 and reset operate during load dump and thermal shutdown Low reverse current of regulator 1 Very low quiescent current when regulators 2 to 6 and power switches are switched off (VI(ig) = 0 V) Reset output Adjustable display regulator High ripple rejection Three power switches Low noise for regulators 2 to 6. Protections Reverse polarity safe (down to −18 V without high reverse current) Able to withstand voltages up to 18 V at the output (supply line may be short-circuited) ESD protected on all pins Thermal protection Load dump protection Foldback current limit protection (except for regulator 2) The regulator outputs and the power switches are DC short-circuited safe to ground and Vbat. ORDERING INFORMATION TYPE NUMBER TDA3615J PACKAGE NAME DBS17P DESCRIPTION plastic DIL-bent-SIL power package; 17 leads (lead length 12 mm) GENERAL DESCRIPTION TDA3615J The TDA3615J is a multiple output voltage regulator with power switches, intended for use in car radios with or without a microprocessor. It contains: One fixed voltage regulator (regulator 1) intended to supply a microprocessor, that also operates during load du...