DatasheetsPDF.com

74LS05 Dataheets PDF



Part Number 74LS05
Manufacturers ON Semiconductor
Logo ON Semiconductor
Description LOW POWER SCHOTTKY
Datasheet 74LS05 Datasheet74LS05 Datasheet (PDF)

SN74LS05 Hex Inverter VCC 14 13 12 * 11 10 * 9 * 8 http://onsemi.com * 1 2 3 * 4 5 * 6 7 GND LOW POWER SCHOTTKY * OPEN COLLECTOR OUTPUTS GUARANTEED OPERATING RANGES Symbol VCC TA VOH IOL Parameter Supply Voltage Operating Ambient Temperature Range Output Voltage – High Output Current – Low Min 4.75 0 Typ 5.0 25 Max 5.25 70 5.5 8.0 Unit V °C V mA 1 14 PLASTIC N SUFFIX CASE 646 14 1 SOIC D SUFFIX CASE 751A ORDERING INFORMATION Device SN74LS05N SN74LS05D Package 14 Pin DIP 14 Pin Shippin.

  74LS05   74LS05


Document
SN74LS05 Hex Inverter VCC 14 13 12 * 11 10 * 9 * 8 http://onsemi.com * 1 2 3 * 4 5 * 6 7 GND LOW POWER SCHOTTKY * OPEN COLLECTOR OUTPUTS GUARANTEED OPERATING RANGES Symbol VCC TA VOH IOL Parameter Supply Voltage Operating Ambient Temperature Range Output Voltage – High Output Current – Low Min 4.75 0 Typ 5.0 25 Max 5.25 70 5.5 8.0 Unit V °C V mA 1 14 PLASTIC N SUFFIX CASE 646 14 1 SOIC D SUFFIX CASE 751A ORDERING INFORMATION Device SN74LS05N SN74LS05D Package 14 Pin DIP 14 Pin Shipping 2000 Units/Box 2500/Tape & Reel © Semiconductor Components Industries, LLC, 1999 1 December, 1999 – Rev. 6 Publication Order Number: SN74LS05/D SN74LS05 DC CHARACTERISTICS OVER OPERATING TEMPERATURE RANGE (unless otherwise specified) Limits Symbol VIH VIL VIK IOH VOL Parameter Input HIGH Voltage Input LOW Voltage Input Clamp Diode Voltage Output HIGH Current 0.25 Output Out ut LOW Voltage 0.35 IIH IIL Input In ut HIGH Current 0.1 Input LOW Current Power Supply Current ICC Total, Output HIGH Total, Output LOW 2.4 6.6 mA VCC = MAX – 0.4 0.5 20 V µA mA mA IOL = 8.0 mA – 0.65 Min 2.0 0.8 – 1.5 100 0.4 Typ Max Unit V V V Test Conditions Guaranteed Input HIGH Voltage for All Inputs Guaranteed Input LOW Voltage for All Inputs VCC = MIN, IIN = – 18 mA VCC = MIN, VOH = MAX IOL = 4.0 mA VCC = VCC MIN, VIN = VIL or VIH per Truth Table mA V VCC = MAX, VIN = 2.7 V VCC = MAX, VIN = 7.0 V VCC = MAX, VIN = 0.4 V AC CHARACTERISTICS (TA = 25°C) Limits Symbol tPLH tPHL Parameter Turn–Off Delay, Input to Output Turn–On Delay, Input to Output Min Typ 17 15 Max 32 28 Unit ns ns Test Conditions VCC = 5.0 V CL = 15 pF, RL = 2.0 kW http://onsemi.com 2 SN74LS05 PACKAGE DIMENSIONS N SUFFIX PLASTIC PACKAGE CASE 646–06 ISSUE M 14 8 B 1 7 NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION L TO CENTER OF LEADS WHEN FORMED PARALLEL. 4. DIMENSION B DOES NOT INCLUDE MOLD FLASH. 5. ROUNDED CORNERS OPTIONAL. INCHES MIN MAX 0.715 0.770 0.240 0.260 0.145 0.185 0.015 0.021 0.040 0.070 0.100 BSC 0.052 0.095 0.008 0.015 0.115 0.135 0.290 0.310 ––– 10_ 0.015 0.039 MILLIMETERS MIN MAX 18.16 18.80 6.10 6.60 3.69 4.69 0.38 0.53 1.02 1.78 2.54 BSC 1.32 2.41 0.20 0.38 2.92 3.43 7.37 7.87 ––– 10_ 0.38 1.01 A F N –T– SEATING PLANE L C K H G D 14 PL 0.13 (0.005) M J M DIM A B C D F G H J K L M N D SUFFIX PLASTIC SOIC PACKAGE CASE 751A–03 ISSUE F –A– 14 8 –B– 1 7 P 7 PL 0.25 (0.010) M B M NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETER. 3. DIMENSIONS A AND B DO NOT INCLUDE MOLD PROTRUSION. 4. MAXIMUM MOLD PROTRUSION 0.15 (0.006) PER SIDE. 5. DIMENSION D DOES NOT INCLUDE DAMBAR PROTRUSION. ALLOWABLE DAMBAR PROTRUSION SHALL BE 0.127 (0.005) TOTAL IN EXCESS OF THE D DIMENSION AT MAXIMUM MATERIAL CONDITION. G C R X 45 _ F –T– SEATING PLANE D 14 PL 0.25 (0.010) K M M S J T B A S DIM A B C D F G J K M P R MILLIMETERS MIN MAX 8.55 8.75 3.80 4.00 1.35 1.75 0.35 0.49 0.40 1.25 1.27 BSC 0.19 0.25 0.10 0.25 0_ 7_ 5.80 6.20 0.25 0.50 INCHES MIN MAX 0.337 0.344 0.150 0.157 0.054 0.068 0.014 0.019 0.016 0.049 0.050 BSC 0.008 0.009 0.004 0.009 0_ 7_ 0.228 0.244 0.010 0.019 http://onsemi.com 3 SN74LS05 ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of.


74LS05 74LS05 74LS05


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)