Write Cycle Timing
8th bit of last byte
Power Up Timing
Time from Power Up to Read
Time from Power Up to Write
Notes: (1) Delays are measured from the time VCC is stable until the specified operation can be initiated. These parameters are periodically
sampled and not 100% tested.
(2) Typical values are for TA = 25˚C and VCC = 5.0V
Nonvolatile Write Cycle Timing
Write Cycle Time
Notes: (1) tWC is the time from a valid stop condition at the end of a write sequence to the end of the self-timed internal nonvolatile write cycle.
It is the minimum cycle time to be allowed for any nonvolatile write by the user, unless Acknowledge Polling is used.