FLASH MEMORY VOLTAGE STEPUP DC/DC CONVERTER IC
DATA SHEET
MOS INTEGRATED CIRCUIT
µPD16901
FLASH MEMORY VOLTAGE STEPUP DC/DC CONVERTER IC
The µPD16901 is a DC/DC con...
Description
DATA SHEET
MOS INTEGRATED CIRCUIT
µPD16901
FLASH MEMORY VOLTAGE STEPUP DC/DC CONVERTER IC
The µPD16901 is a DC/DC converter IC which produces a 12 V output from a 5 V input source. The integration of a control circuit and power MOSFET in the output stage on a single-chip allows a power supply for flash memory write and erasure to be configured with a reduced number of external components.
FEATURES
With an on-chip output stage power MOSFET, fewer external components are needed. The ALLMOS structure achieves low power consumption. Internally set output voltage eliminates the need for adjustment. Output can be turned ON/OFF via an external signal. A timer latch type overcurrent protection circuit on chip
ORDERING INFORMATION
Part Number Package 14-pin plastic SOP (300 mil)
µPD16901GS
BLOCK DIAGRAM
ON/OFF VIN CDLY C1H C1L C2
Reference voltage circuit
Startup circuit
Timer latch short-circuit protection circuit
Charge pump circuit
VSW F/F SW
β
Overcurrent detection circuit
Oscillation circuit
C.S.
FB
RT
GND
The information in this document is subject to change without notice. Document No. S10643EJ2V0DS00 (2nd edition) Date Published May 1997 N Printed in Japan
©
1997
µPD16901
ABSOLUTE MAXIMUM RATINGS (TA = 25 ˚C unless specified otherwise)
Item Supply voltage Output voltage Total power dissipation Operating ambient temperature Storage temperature range Symbol VIN VSW PT TA Tstg Note Condition Rating 7.0 20 0.9 –20 to 85 –55 to +150 Unit V V W ˚C ˚C
...
Similar Datasheet