S1A0501X01

DIGITAL CONTROLLED AUDIO PROCESSOR S1A0501X01 GENERAL DESCRIPTION The S1A0501X01 is an audio processor for volume/tone/fader control, which is suitable for car radios or Hi-Fi system. It has a built-in trimmer for user to set a source level. R/L rear output is changable to input in the case of a home audio system for user conveniency, an external equalizer or a noise reduction circuit is selectable. When the S1A0501X01 is used with some sound-effect equipment such as graphic equalizer, the internal tone control block of S1A0501X01 can be bypassed for decreasing redundancy. All selections and function controls are designed to be controlled by an I2C-bus protocol or a general microprocessor interface protocol. 32−SOP−450B #1 FEATURES 3-Input multiplexing Source Level trimmer (selectable input level) Volume control in 0.6dB step Tone control (internal bass/treble function block with external components) Source out / volume in (enable ext.graphic eq./ noise reduction equipment) Loudness / mute Fader control ( separated for balance ) All functions are programmable / controllable via serial I2C bus or general Micom interface protocol. ORDERING INFORMATION Device S1A0501X01-S0B0 Package 32−SOP−450B Operating Temperature −25°C - +75°C 1 S1A0501X01 DIGITAL CONTROLLED AUDIO PROCESSOR BLOCK DIAGRAM 0.47uF VCC 0.1uF 2.2uF 2.2uF each 1 RIGHT INPUT 1-3 2 2 11 5.6K 0.1uF 1 29 7 6 8 0.1uF 5 0.0027uF 10uF 17 26 23 22 RFO 4.7uF VOLUME 10 TREBLE BASS FADER ...