S11MS7

S11MS7 S11MS7 s Features 1. High speed ( t on : MAX. 15 µ s ) 2. High noise resistance ( dV /dt : MIN. 500V/ µ s ) 3. Low trigger current ( IFT : MAX. 5mA ) 4. Mini-flat package type 5. Recognized by UL, file No.E64380 High Speed/ High Noiseresistance Type Phototriac Coupler s Outline Dimensions 1.27± 0.25 6 5 4 S11MS 7 1 Anode mark 3 0.4± 0.1 ( Unit : mm ) Internal connection diagram 6 5 4 4.4± 0.2 0.6MAX. s Applications 1. For triggering medium/high power triac 1 3 3.6± 0.3 0.1± 0.1 2.6± 0.2 0.2 7.0+ - 0.7 0.4 0.5+ - 0.2 6˚ 1 Anode 3 Cathode 4 Anode/ cathode 5 No external connection 6 Anode/ cathode s Absolute Maximum Ratings Input Parameter Forward current Reverse voltage ∗1 RMS ON-state current Peak one cycle surge current Repetitive peak OFF-state voltage *2 Isolation voltage Operating temperature Storage temperature ∗3 Soldering temperature Symbol IF VR IT I surge V DRM Viso Topr Tstg Tsol ( Ta = 25˚C ) Rating 50 6 0.05 0.6 ( 50Hz Sine Wave) 400 2 500 - 30 to +100 - 40 to +125 260 Unit mA V A rms A V V rms ˚C ˚C ˚C IT (A) 0 2 IT θ 1, θ 2<= 90˚ θ2 180˚ 0.2± 0.05 90˚ θ1 360˚ θ Soldering area 0.2mm or more C0.4 Input side 5.3± 0.3 Output ∗1 The definition of conduction angle θ of effective on current It should be as shown in the right drawing. ∗2 40 to 60% RH, AC for 1 minute, f = 60Hz ∗3 For 10 seconds “ In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that occur in equipment using any o...