DatasheetsPDF.com

S102S11 Dataheets PDF



Part Number S102S11
Manufacturers Sharp Electrionic Components
Logo Sharp Electrionic Components
Description Solid State Relays
Datasheet S102S11 DatasheetS102S11 Datasheet (PDF)

S102S11/S102S12/S202S11/S202S12 S102S11/S102S12 S202S11/S202S12 s Features 1. High radiation resin mold package 2. Built-in snubber circuit 3. Built-in zero-cross circuit ( S102S12/S202S12) 4. High repetitive peak OFF-state voltage S102S11/S102S12 V DRM : 400V S202S11/S202S12 V DRM : 600V 5. RMS ON-state current I T : MAX. 8Arms at TC <= 88˚C ( With heat sink) 6. Isolation voltage between input and output ( Viso : 4 000Vrms ) 7. Recognized by UL, file No. E94758 Approved by CSA, No. LR63705 SI.

  S102S11   S102S11



Document
S102S11/S102S12/S202S11/S202S12 S102S11/S102S12 S202S11/S202S12 s Features 1. High radiation resin mold package 2. Built-in snubber circuit 3. Built-in zero-cross circuit ( S102S12/S202S12) 4. High repetitive peak OFF-state voltage S102S11/S102S12 V DRM : 400V S202S11/S202S12 V DRM : 600V 5. RMS ON-state current I T : MAX. 8Arms at TC <= 88˚C ( With heat sink) 6. Isolation voltage between input and output ( Viso : 4 000Vrms ) 7. Recognized by UL, file No. E94758 Approved by CSA, No. LR63705 SIP Type SSR with Snubber Circuit and Mouning Capability for External Heat Sink s Outline Dimensions (Unit : mm ) * The metal parts marked * are common to terminal 1 . g Do not allow external connection. ( ) : Typical dimensions 18.5 ± 0.2 16.4 ± 0.3 φ 3.2 ± 0.2 A (Model No.) B S102S11 8A135VAC S102S12 S202S11 8A250VAC S202S12 3.2 ± 0.2 5.5 ± 0.2 5.0 ± 0.3 * g 0.2 MAX. A B + 4.2MAX. 1 2 3 4 11.2MIN. 0.6 ± 0.1 4 4 4 - 1.1 ± 0.2 - 1.25 ± 0.3 - 0.8 ± 0.2 19.6 ± 0.2 (36.0) s Applications 1. Automatic vending machines 2. Amusement equipment 3. Programmable controllers (5.08) (7.62) Internal connection diagram S102S11 / S202S11 (2.54) (1.4) S102S12 / S202S12 Zero-cross circuit 1 2 3 4 1 2 3 4 1 2 3 4 s Model line-ups For 100V lines Built-in snubber circuit Built-in snubber circuit and zero-cross circuit S102S11 For 200V lines S202S11 1 2 3 4 Output ( Triac T2 ) Output ( Triac T1 ) Input ( + ) Input ( - ) Output ( Triac T2 ) Output ( Triac T1 ) Input ( + ) Input ( - ) S102S12 S202S12 “ In the absence of confirmation by device specification sheets, SHARP takes no responsibility for any defects that occur in equipment using any of SHARP's devices, shown in catalogs, data books, etc. Contact SHARP in order to obtain the latest version of the device specification sheets before using any SHARP's device.” S102S11/S102S12/S202S11/S202S12 s Absolute Maximum Ratings Input Parameter Forward current Reverse voltage RMS ON-state current *1 Peak one cycle surge current Repetitive peak-OFF state voltage Non-repetitive peak-OFF state voltage Critical rate of rise of ON-state current Isolation voltage Operating temperature Storage temperature *3 Soldering temperature *2 ( Ta = 25˚C ) Symbol IF VR IT I surge S102S11/S102S12 S202S11/S202S12 S102S11/S102S12 S202S11/S202S12 V DRM V DSM dI T /dt V iso T opr T stg T sol S102S11/S102S12 S202S11/S202S12 V out Rating 50 6 *4 8 80 400 600 400 600 50 4 000 - 20 to + 80 - 30 to + 100 260 135 250 Unit mA V A rms A V V A/ µ s V rms ˚C ˚C ˚C V rms Output Load supply voltage *1 50Hz sine wave, start at Tj= 25˚C *2 60Hz AC for 1 minute, RH= 40 to 60% , Apply voltages between input and output, by the dielectric withstand voltage tester with zero-cross circuit. ( Input and output shall be shorted respectively) . ( Note) When the isolation voltage is necessary at using external hear sink, please use the insulation sheet. *3 For 10 seconds *4 Tc <= 88˚C s Electro-optical Characteristics Parameter Forward voltage Reverse.


S102S03 S102S11 S102S12


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)