Single analog switch
Standard ICs
Single analog switch
BU4S66
The BU4S66 is an ultra-compact IC with one circuit of the bi-directional analo...
Description
Standard ICs
Single analog switch
BU4S66
The BU4S66 is an ultra-compact IC with one circuit of the bi-directional analog switch BU4066B built into an SMP package. Setting the enable input (CONT) to the "H" level sets the impedance between the switch input and the output pins low (ON state) and setting CONT to the "L" level sets the impedance high (OFF state).
Features 1) Low current dissipation. 2) Super-mini mold package designed for surface mounting.
3) Wide range of operating power supply voltage. 4) Direct drive of 2 L-TTL inputs and 1 LS-TTL input.
Block diagram
VDD 5 CONT 4
1 I/O
2 O/I
3 VSS
1
Standard ICs
BU4S66
Absolute maximum ratings (Ta = 25°C)
Parameter Power supply voltage Power dissipation Input current Operating temperature Storage temperature Input voltage Symbol VDD Pd IIN Topr Tstg VIN Limits VSS – 0.3 ~ VSS + 18 170 ± 10 – 40 ~ + 85 – 55 ~ + 150 VSS – 0.3 ~ VDD + 0.3 Unit V mW mA °C °C V
∗1 These values indicate the range limits of the voltage that can be applied to each pin without
destroying it. Operation is not guaranteed at these values.
∗2 Reduced by 1.7mW for each increase in Ta of 1°C over 25°C.
Recommended operating conditions (Ta = 25°C, V
Parameter Power supply voltage Input voltage Symbol VDD VIN Min. 3 0
SS
= 0V)
Max. 16 VDD Unit V V
Typ. — —
Electrical characteristics DC characteristics (unless otherwise noted, V
Parameter Control input high level voltage Symbol Min. 3.5 VIH 7.0 11.0 — Control input low level voltage VI...
Similar Datasheet