DatasheetsPDF.com

BU1920F Dataheets PDF



Part Number BU1920F
Manufacturers Rohm
Logo Rohm
Description RDS / RBDS decoder
Datasheet BU1920F DatasheetBU1920F Datasheet (PDF)

Audio ICs RDS / RBDS decoder BU1920 / BU1920F / BU1920FS The BU1920, BU1920F and BU1920FS are RDS / RBDS decoders that employ a digital PLL. It has a built-in anti-aliasing filter and an eight-stage BPF (switched-capacitor filter). Linear CMOS circuitry is used for low current dissipation. FApplications RDS / RBDS compatible FM receivers for Europe and North America, car stereo systems, home stereo systems and FM pagers. FFeatures 1) Low current dissipation. 2) Two-stage anti-aliasing filter..

  BU1920F   BU1920F



Document
Audio ICs RDS / RBDS decoder BU1920 / BU1920F / BU1920FS The BU1920, BU1920F and BU1920FS are RDS / RBDS decoders that employ a digital PLL. It has a built-in anti-aliasing filter and an eight-stage BPF (switched-capacitor filter). Linear CMOS circuitry is used for low current dissipation. FApplications RDS / RBDS compatible FM receivers for Europe and North America, car stereo systems, home stereo systems and FM pagers. FFeatures 1) Low current dissipation. 2) Two-stage anti-aliasing filter. 3) 57kHz bandpass filter. 4) DSB demodulation (digital PLL). 5) ARI signal discrimination. 6) Quality indication output for demodulated data. FAbsolute maximum ratings (Ta = 25_C) FRecommended operating conditions (Ta = 25_C) 170 Audio ICs FBlock diagram Application example BU1920 / BU1920F / BU1920FS Pin assignments 171 Audio ICs FPin descriptions BU1920 / BU1920F / BU1920FS 172 Audio ICs FInput / output circuits BU1920 / BU1920F / BU1920FS 173 Audio ICs BU1920 / BU1920F / BU1920FS FElectrical characteristics (unless otherwise noted, Ta = 25_C, VDD = 5.0V and GND = 0.0V) Filter block Demodulator block 174 Audio ICs FOutput data timing BU1920 / BU1920F / BU1920FS The clock (RCLK) frequency is 1187.5Hz. Depending on the state of the internal PLL clock, the data (RDATA) is replaced in synchronous with either the rising or falling edge of the clock. To read the data, you may choose either the rising or falling edge of the clock as the reference. The data is valid for 416.7µs, after the reference clock edge. QUAL pin operation: Indicates the quality of the demodulated data. (1) Good data : HI (2) Poor data : LO ARI pin operation: ARI / RDS discrimination. (1) ARI : LO (2) RDS + ARI : LO (3) RDS : HI (4) No signal : unstable FElectrical characteristics curve 175 .


BU1920 BU1920F BU1920FS


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)