BTS7810K

TrilithIC Data Sheet 1 1.1 Overview Features BTS 7810 K Quad D-MOS switch Free configurable as bridge or quad-switch Optimized for DC motor management applications Low RDS ON: 26 mΩ high-side switch, 14 mΩ low-side switch (typical values @ 25 °C) Maximum peak current: typ. 42 A @ 25 °C= Very low quiescent current: typ. 4 µA @ 25 °C= Small outline, thermal optimized PowerPak Load and GND-short-circuit-protection Operates up to 40 V Status flag for over temperature Open load detection in Off-mode Overtemperature shut down with hysteresis Internal clamp diodes Isolated sources for external current sensing Under-voltage detection with hysteresis Ordering Code Q67060-S6129 P-TO263-15-1 Type BTS 7810 K 1.2 Description Package P-TO263-15-1 The BTS 7810 K is part of the TrilithIC family containing three dies in one package: One double high-side switch and two low-side switches. The drains of these three vertical DMOS chips are mounted on separated leadframes. The sources are connected to individual pins, so the BTS 7810 K can be used in H-bridge- as well as in any other configuration. The double high-side is manufactured in SMART SIPMOS® technology which combines low RDS ON vertical DMOS power stages with CMOS control circuit. The high-side switch is fully protected and contains the control and diagnosis circuit. To achieve low RDS ON and fast switching performance, the low-side switches are manufactured in S-FET 2 logic level technology. The equiv...