QVE00832

PHOTOTRANSISTOR OPTICAL INTERRUPTER SWITCH QVE00832 PACKAGE DIMENSIONS 0.551 (14.00) + D 0.236 (6.00) E + C L 0.020 (.50) C L 0.197 (5.00) 0.394 (10.00) 0.295 (7.50) (2X) C L (OPTICAL) 0.100 (2.50) 0.027 (.70) (2X) 0.197 (5.00) MIN (4X) FEATURES No contact switching 5mm wide slot SCHEMATIC 1 4 0.400 (10.16) (2X) (NOM) 0.260 (6.60) C L 2 3 0.092 (2.35) 0.5 mm aperture width Opaque black plastic housing Locating knobs on housing base for accurate mounting 2 3 PINS 0.020 (.51) (4X) SQ. (TYP) KNOB Ø0.026 (.66) C L 0.100 (2.54) (2X) (TYP) 0.205 (5.20) Transistor Output 1 4 PIN 1 ANODE PIN 2 CATHODE PIN 3 COLLECTOR PIN 4 EMITTER NOTES 1. Derate power dissipation linearly 1.67 mW/°C above 25°C. 2. RMA flux is recommended. 3. Methanol or isopropyl alcohols are recommended as cleaning agents. 4. Soldering iron tip 1/16” (1.6mm) from housing. NOTES: 1. Dimensions for all drawings are in inches (millimeters). 2. Tolerance of ± .010 (.25) on all non-nominal dimensions unless otherwise specified. ABSOLUTE MAXIMUM RATINGS Parameter Operating Temperature Storage Temperature Soldering Temperature (Iron)(2,3,4) Soldering Temperature (Flow)(2,3) EMITTER Continuous Forward Current Reverse Voltage Power Dissipation(1) SENSOR Collector-Emitter Voltage Emitter-Collector Voltage Collector Current Power Dissipation(1) (TA = 25°C unless otherwise specified) Symbol TOPR TSTG TSOL-I TSOL-F IF VR PD VCEO VECO IC PD Rating -55 to +100 -55 to +100 240 for 5 sec 260 fo...