QRD1113/1114
REFLECTIVE OBJECT SENSOR
PACKAGE DIMENSIONS
0.083 (2.11) OPTICAL CENTERLINE 0.240 (6.10) 0.120 (3.05) PIN 1...
QRD1113/1114
REFLECTIVE OBJECT SENSOR
PACKAGE DIMENSIONS
0.083 (2.11) OPTICAL CENTERLINE 0.240 (6.10) 0.120 (3.05) PIN 1 INDICATOR
FEATURES
Photo
transistor Output No contact surface sensing Unfocused for sensing diffused surfaces Compact Package Daylight filter on sensor
0.173 (4.39)
0.183 (4.65)
NOTES
0.500 (12.7) MIN
(Applies to Max Ratings and Characteristics Tables.)
0.020 (0.51) SQ. (4X)
2 3
0.100 (2.54)
1 4
1. Derate power dissipation linearly 1.33 mW/°C above 25°C. 2. RMA flux is recommended. 3. Methanol or isopropyl alcohols are recommended as cleaning agents. 4. Soldering iron 1/16” (1.6mm) from housing. 5. As long as leads are not under any spring tension. 6. D is the distance from the sensor face to the reflective surface. 7. Cross talk (ICX) is the collector current measured with the indicator current on the input diode and with no reflective surface. 8. Measured using an Eastman Kodak neutral white test card with 90% diffused reflecting as a reflective surface.
0.083 (2.11)
PIN 1 COLLECTOR PIN 2 EMITTER
PIN 3 ANODE PIN 4 CATHODE
SCHEMATIC
2 3
NOTES: 1. Dimensions for all drawings are in inches (millimeters). 2. Tolerance of ± .010 (.25) on all non-nominal dimensions unless otherwise specified. 3. Pins 2 and 4 typically .050” shorter than pins 1 and 3. 4. Dimensions controlled at housing surface.
1
4
ABSOLUTE MAXIMUM RATINGS
Parameter Operating Temperature Storage Temperature Lead Temperature (Solder Iron)(2,3) Lead Temperature (Solder Fl...