PLASTIC INFRARED LIGHT EMITTING DIODE
PLASTIC INFRARED LIGHT EMITTING DIODE
QED522
PACKAGE DIMENSIONS
0.190 (4.83) 0.178 (4.52)
QED523
REFERENCE SURFACE
0....
Description
PLASTIC INFRARED LIGHT EMITTING DIODE
QED522
PACKAGE DIMENSIONS
0.190 (4.83) 0.178 (4.52)
QED523
REFERENCE SURFACE
0.220 (5.59)
0.030 (0.76) NOM 0.800 (20.3) MIN
0.050 (1.27)
CATHODE 0.100 (2.54) NOM Ø 0.215 (5.46) NOM
SCHEMATIC
45°
0.020 (0.51) SQ. (2X)
ANODE
R 0.022 (0.56)
CATHODE NOTES: 1. Dimensions for all drawings are in inches (mm). 2. Tolerance of ± .010 (.25) on all non-nominal dimensions unless otherwise specified.
DESCRIPTION
The QED522/523 is an 880 nm AlGaAs LED encapsulated in a clear, peach tinted, plastic TO-46 package.
FEATURES
λ= 880 nm Chip material = AlGaAs Package type: Plastic TO-46 Matched Photosensor: QSD722/723/724 Narrow Emission Angle, 20° High Output Power Package material and color: clear, peach tinted, plastic
© 2002 Fairchild Semiconductor Corporation
Page 1 of 4
6/13/02
PLASTIC INFRARED LIGHT EMITTING DIODE
QED522
ABSOLUTE MAXIMUM RATINGS (TA = 25°C unless otherwise specified)
Parameter Operating Temperature Storage Temperature Soldering Temperature (Iron)(2,3,4) Symbol TOPR TSTG TSOL-I TSOL-F IF VR PD Rating -40 to + 100 -40 to + 100 240 for 5 sec 260 for 10 sec 100 5 200 Unit °C °C °C °C mA V mW
QED523
Soldering Temperature (Flow)(2,3) Continuous Forward Current Reverse Voltage Power Dissipation(1)
NOTES: 1. Derate power dissipation linearly 2.67 mW/°C above 25°C. 2. RMA flux is recommended. 3. Methanol or isopropyl alcohols are recommended as cleaning agents. 4. Soldering iron 1/16" (1.6 mm) minimum from housin...
Similar Datasheet