Decoder
UNISONIC TECHNOLOGIES CO., LTD RCR02
DECODER FOR REMOTE CONTROLLER WITH FIVE FUNCTIONS
DESCRIPTION
The chip can be us...
Description
UNISONIC TECHNOLOGIES CO., LTD RCR02
DECODER FOR REMOTE CONTROLLER WITH FIVE FUNCTIONS
DESCRIPTION
The chip can be used with the encoder RCT02 to provide a complete control functions to the remote-controlled toy. The RCR02 has five output pins corresponding with the five function actions i.e, forward, backward, rightward, leftward and turbo. The received signals are amplified by the three-stage amplifier, and then the appropriate amplified signals are sampled, fault-tolerantly checked and decoded to control the actions of the remote-controlled toy.
There is an internal oscillator in the RCR02. By adding an external resistor conveniently, the oscillator will be constructed. The oscillator frequency can be adjusted by the external resistor. The relative error between the frequencies of the two on chip oscillators in the RCT02 and RCR02 must be less than ±25%.
FEATURES
* Five output pins for control functions * Operating power-supply voltage range: 2.5 to 5.0V * On-chip reversing amplifiers * On-chip oscillator with an external resistor * Low operating current * Few external components needed
ORDERING INFORMATION
Lead Free RCR02L-D16-T RCR02L-S16-R
Ordering Number Halogen Free
RCR02G-D16-T RCR02G-S16-R
Package
DIP-16 SOP-16
CMOS IC
DIP-16 SOP-16
Packing Tube
Tape Reel
www.unisonic.com.tw Copyright © 2018 Unisonic Technologies Co., Ltd
1 of 7
QW-R502-001.C
RCR02
MARKING
DIP-16
SOP-16
CMOS IC
PIN CONFIGURATION
VO2 1 GND 2
SI 3 OSCI 4 OSCO 5 RIGHT 6 LEFT 7 ...
Similar Datasheet