Document
SANKEN ELECTRIC CO., LTD.
1 Scope The present specifications shall apply to an RC2.
2 Outline
Type Silicon Rectifier Diode
Structure
Resin Molded
Applications
High Frequency Rectification, etc.
RC2
3 Flammability UL94V-0(Equivalent)
4 Absolute maximum ratings
No. Item
Symbol Unit
1 Transient Peak Reverse Voltage VRSM
2 Peak Reverse Voltage
VRM
3 Average Forward Current
IF(AV)
4 Peak Surge Forward Current 5 I2t Limiting Value
IFSM I2t
V V A A A2s
6 Junction Temperature
Tj °C
7 Storage Temperature
Tstg °C
Rating 2000 2000 0.2 20 2.0 -40 to +150 -40 to +150
Conditions
Refer to derating curve in Section 7 10ms. Half sine wave, one shot 1ms≦t≦10ms
5 Electrical characteristics (Ta=25°C, unless otherwise specified)
No.
Item
Symbol Unit
Rating
1 Forward Voltage Drop
VF V
2.0 max.
2 Reverse Leakage Current
IR
3
Reverse Leakage Current Under High Temperature
H・IR
4 Reverse Recovery Time
trr-1 trr-2
uA
uA μs μs
10 max. 300 max. 4.0 max. 1.3 max.
5 Thermal Resistance
Rth(j-l) °C/W
12 max.
Conditions
IF=0.2A
VR=VRM
VR=VRM, Tj=100°C IF=IRP=500mA 90% Recovery point, Tj=25°C IF=0.5A, IRP=1A 75% Recovery point ,Tj=25°C
Between Junction and Lead
061031
1/4
61426-01
SANKEN ELECTRIC CO., LTD. 6 Characteristics
0.5 Tj=150°C
IF(AV) - PF
0.4
t T
0.3
t/T=1/3,sinewave
t/T=1/6
0.2 t/T=1/2
0.1
DC
Forward Power Dissipation, PF (W)
0.0 0.0
0.1 Average Forward Current, IF(AV) (A)
RC2 0.2
Reverse Power Dissipation , PR (W)
1.0 Tj=150°C
t T
0.5
VR - PR
1-t/T=5/6 1-t/T=2/3
1-t/T=1/2
0.0 0
1000 Reverse Voltage, VR (V)
sinewave 2000
061031
2/4
61426-01
SANKEN ELECTRIC CO., LTD. 7 Derating
0.2
Average Forward Current, IF(AV) (A)
0.1
Tj=150°C
0.0 100
t T
110
Tl - IF(AV) t/T=1/6
t/T=1/3 t/T=1/2 sinewave DC
VR=2000V
120 130 Lead Temperature, Tl (°C)
140
150
RC2
Average Forward Current, IF(AV) (A)
0.2
t/T=1/6
t/T=1/3 0.1
t/T=1/2
Ta - IF(AV)
VR=2000V DC
Tj=150°C
0.0 0
t T
sinewave
50 100 Ambient Temperature, Ta (°C)
150
061031
3/4
61426-01
SANKEN ELECTRIC CO., LTD. 8 Package information 8-1Package type, physical dimensions and material
62.5± 0.7 7.2± 0.2
※3
※1
※2
RC2
φ4.0±0.2 φ0.78±0.05
*1 The allowance position of Body against the center of whole lead wire is 0.5mm(max.) *2 The centric allowance of lead wire against center of physical body is 0.3mm(max.) *3 The burr may exit up to 2mm from the body of lead
8-2Appearance
The body shall be clean and shall not bear any stain, rust or flaw.
8-3Marking
カソード CCatthhooddeeMBaarnkd
①①
① Type number RC2 ② Lot number 1
First digit: Last digit of Year Second digit: Month
From 1 to 9 for Jan. to Sep. O for Oct., N for Nov., and D for Dec. ③ Lot number 2 (ten days) ・ Top of the month ・・ Middle of month ・・・ End of month
Dimensions in mm
②③
②③
061031
4/4
61426-01
.