Document
RB706F-40
Schottky Barrier Diode
●Outline
VR
40
V
Io
30
mA
IFSM
0.2
A
●Features High reliability Small mold type Low capacitance
●Inner Circuit
Data sheet
●Application
●Packaging Specifications
High speed switching
Packing
Embossed Tape
Reel Size(mm)
180
●Structure
Taping Width(mm)
8
Quantity(pcs)
3000
Epitaxial planar
Taping Code
T106
Marking
3J
●Absolute Maximum Ratings (Ta = 25ºC unless otherwise stated)
Parameter
Repetitive peak reverse voltage Reverse voltage
Symbol VRM VR
Conditions Duty≦0.5 Reverse direct voltage
Limits
Unit
45
V
40
V
Average rectified forward current
Io
Glass epoxy mounted、60Hz half sin waveform、resistive load、per diode
30
mA
Peak forward surge current
Junction temperature Storage temperature
IFSM
Tj Tstg
60Hz half sin waveform、Non-repetitive、 one cycle、per diode、Ta=25ºC
-
●Characteristics (Ta = 25ºC unless otherwise stated)
Parameter
Symbol
Conditions
Forward voltage
VF
IF=1mA
Reverse current
IR
VR=10V
Capacitance between terminals
Ct
VR=1V f=1MHz
※Caution:static electricity
0.2
A
125
℃
-40 ~ 125
℃
Value per diode Min. Typ. Max. Unit
- - 0.37 V - - 1 μA - 2 - pF
Attention
www.rohm.com
© 2016 ROHMCo., Ltd.All rights reserved.
1/4
2019/07/17_Rev.004
RB706F-40
●Characteristic Curves
Data sheet
www.rohm.com
© 2016- ROHMCo., Ltd.All rights reserved.
2/4
2019/07/17_Rev.004
RB706F-40
●Characteristic Curves
Data sheet
www.rohm.com
© 2016 ROHMCo., Ltd.All rights reserved.
3/4
2019/07/17_Rev.004
RB706F-40
Data sheet
●Dimensions (SOT-323 SC-70 UMD3)
●Taping (Unit:mm)
www.rohm.com
© 2016 ROHMCo., Ltd.All rights reserved.
4/4
2019/07/17_Rev.004
Notice
Precaution on using ROHM Products 1. Our Products are designed and manufactured for application in ordinary electronic equipment (such as AV equipment, OA equipment, telecommunication equipment, home electronic appliances, amusement equipment, etc.). If you intend to use our Products in devices requiring extremely high reliability (such as medical equipment (Note 1), transport equipment, traffic equipment, aircraft/spacecraft, nuclear power controllers, fuel controllers, car equipment including car accessories, safety devices, etc.) and whose malfunction or failure may cause loss of human life, bodily injury or serious damage to property (“Specific Applications”), please consult with the ROHM sales representative in advance. Unless otherwise agreed in writing by ROHM in advance, ROHM shall not be in any way responsible or liable for any damages, expenses or losses incurred by you or third parties arising from the use of any ROHM’s Products for Specific Applications.
(Note1) Medical Equipment Classification of the Specific Applications
JAPAN
USA
EU
CHINA
CLASSⅢ CLASSⅣ
CLASSⅢ
CLASSⅡb CLASSⅢ
CLASSⅢ
2. ROHM designs and manufactures its Products subject to strict quality control system. However, semiconductor products can fail or malfunction at a certain rate. Please be sure to implement, at your own responsibilities, adequate safety measures including but not limited to fail-safe design against the physical injury, damage to any property, which a failure or malfunction of our Products may cause. The following are examples of safety measures: [a] Installation of protection circuits or other protective devices to improve system safety [b] Installation of redundant circuits to reduce the impact of single or multiple circuit failure
3. Our Products are designed and manufactured for use under standard conditions and not under any special or extraordinary environments or conditions, as exemplified below. Accordingly, ROHM shall not be in any way responsible or liable for any damages, expenses or losses arising from the use of any ROHM’s Products under any special or extraordinary environments or condition.