IF GAIN CONTROLLED AMPLIFIER
Preliminary 3
Typical Applications • CATV Set-Top Boxes • Cable Modems • Cable-Ready TVs
RF3330
IF GAIN CONTROLLED AMPL...
Description
Preliminary 3
Typical Applications CATV Set-Top Boxes Cable Modems Cable-Ready TVs
RF3330
IF GAIN CONTROLLED AMPLIFIER
3
1.59 1.61 0.365 0.15 0.05
The RF3330 is a gain-controlled amplifier suitable for application in the IF receive section of a cable tuner. It consists of a high impedance differential input stage, a low impedance differential output stage, and a differential gain-controlled amplifier. The voltage gain may be varied by applying an analog control voltage. The device is fabricated on an advanced Bi-CMOS process, and is housed in an eight-lead SOT23 package.
2.80 3.00
0.650 2.60 3.00 3°MAX 0°MIN 1.44 1.04 0.127
*When Pin 1 is in upper left, text reads downward (as shown).
0.35 0.55
Optimum Technology Matching® Applied
Package Style: SOT23-8
üSi Bi-CMOS
Si BJT
GaAs HBT SiGe HBT
GaAs MESFET Si CMOS
Features Single 5V Positive Power Supply 26dB Gain Range 150MHz Bandwidth
VCC 1 GND 2 VOUT 3 VOUTB 4
Biasing & AGC Control
8 VCC 7 VIN 6 VINB 5 VAGC
Compact Package
Ordering Information
RF3330 RF3330 PCBA RF3330 PCBA IF Gain Controlled Amplifier Fully Assembled Evaluation Board - 75 Ω Fully Assembled Evaluation Board - 50 Ω Tel (336) 664 1233 Fax (336) 664 0454 http://www.rfmd.com
Functional Block Diagram
RF Micro Devices, Inc. 7628 Thorndike Road Greensboro, NC 27409, USA
Rev A2 010820
3-1
LINEAR CATV AMPLIFIERS
Product Description
TEXT*
RF3330
Absolute Maximum Ratings Parameter
Supply Voltage Operating Ambient Temperature Storag...
Similar Datasheet