RF2627

RF2627 10 Typical Applications 3V CDMA Cellular Systems 3V CDMA PCS Systems 3V TDMA Cellular/PCS Systems General Purpose Linear IF Amplifier Commercial and Consumer Systems Portable Battery Powered Equipment 3V CDMA RECEIVE AGC AMPLIFIER Product Description The RF2627 is a complete AGC amplifier designed for the receive section of 3V CDMA cellular and PCS applications. It is designed to amplify IF signals while providing more than 90dB of gain control range. Noise Figure, IP3, and other specifications are designed for CDMA handsets. This circuit is designed as part of the RFMD CDMA Chip Set, consisting of a Transmit IF AGC Amp, a Transmit Upconverter, a Receive LNA/Mixer, and this Receive IF AGC Amp. The IC is manufactured on an advanced high frequency Silicon Bipolar process, and is packaged in a standard miniature 8-lead plastic MSOP package. 0.192 + 0.008 0.012 0.006 + 0.003 -A- 0.0256 0.118 + 0.004 sq. 6° MAX 0° MIN 0.034 NOTES: 1. Shaded lead is pin 1. 2. All dimensions are exclusive of flash, protrusions or burrs. 3. Lead coplanarity: 0.002 with respect to datum "A". 0.021 + 0.004 0.006 + 0.002 Optimum Technology Matching® Applied Si Bi-CMOS SiGe HBT Si CMOS Supports PCS and Cellular Applications -48dB to +48dB Gain Control Range Single 3V Power Supply IN+ 1 IN- 2 GND 3 GC 4 GAIN CONTROL 8 VCC1 7 VCC2 6 OUT+ 5 OUT- -2dBm Input IP3 12MHz to 285MHz Operation Monolithic Construction Ordering Information RF2627 RF2627 PCBA 3V CDMA Recei...