3V LOW NOISE AMPLIFIER
Preliminary 4
Typical Applications • GSM Handsets • CDMA Handsets • TDMA Handsets • IF or RF Buffer Amplifiers
RF2371
3...
Description
Preliminary 4
Typical Applications GSM Handsets CDMA Handsets TDMA Handsets IF or RF Buffer Amplifiers
RF2371
3V LOW NOISE AMPLIFIER
Driver Stage for Power Amplifiers Oscillator Loop Amplifiers
Product Description
The RF2371 is a general purpose, low-cost, high performance low noise amplifier designed for operation from a 2.7V to 4V supply with low current consumption. The attenuation of the device is controlled when in power down mode, providing a known gain step. The RF2371 is available in a small industry-standard SOT23-8 surface mount package, enabling compact designs which conserve board space. The design features a highly accurate PTAT (Proportional To Absolute Temperature) biasing scheme using bandgap cells.
1.59 1.61 0.365 0.15 0.05
4
GENERAL PURPOSE AMPLIFIERS
0.127
TEXT*
2.80 3.00
0.650 2.60 3.00 *When Pin 1 is in upper left, text reads downward (as shown). 3°MAX 0°MIN 1.44 1.04
0.35 0.55
Optimum Technology Matching® Applied
Package Style: SOT23-8
üSi Bi-CMOS
Si BJT
GaAs HBT SiGe HBT
GaAs MESFET Si CMOS
Features 700MHz to 2000MHz Operation 2.7V to 3.6V Single Supply +5dBm Input IP3 at 3.0mA 12dB Gain at 1950MHz 1.8dB Noise Figure at 1950MHz 17dB Gain Step
RF IN
1
8 7 6 Bias Circuits 5
RF OUT ISET VCC ENABLE
GND1 2 GND2 3 IPSET 4
Ordering Information
RF2371 RF2371 PCBA 3V Low Noise Amplifier Fully Assembled Evaluation Board
Functional Block Diagram
RF Micro Devices, Inc. 7625 Thorndike Road Greensboro, NC 27409, USA
Tel...
Similar Datasheet