THREE PHASE POWER/ENERGY METERING INTERFACE ADAPTOR
sames
FEATURES
n
SA9605APA APPLICATION NOTE
PA9605AP THREE PHASE POWER/ENERGY METERING INTERFACE ADAPTOR
n
Demonstrat...
Description
sames
FEATURES
n
SA9605APA APPLICATION NOTE
PA9605AP THREE PHASE POWER/ENERGY METERING INTERFACE ADAPTOR
n
Demonstration of the SA9605APA device using a PM9105APE module Pulse rate selectable via jumper leads Energy direction indicator provided
Meets the accuracy requirements for Class 1 AC Watt hour meters
n n
DESCRIPTION The PA9605AP interface adaptor converts the SA9605APA (DIP-20) package to a SA9105XP (DIP-40) footprint. This enables the evaluation of the SA9605APA using the PM9105AP evaluation module. It is advised that this Application Note should be read in conjunction with the PM9105AP Application Note.
1/6
7185 PDS038-SA9605-001 Rev. A 19-03-97
PA9605AP BLOCK DIAGRAM
CONNECTION DESCRIPTION Designation Location Description PL5 PM9105AP Voltage Supply connected to Phase 1 Voltage Supply connected to Phase 2 Voltage Supply connected to Phase 3 Voltage Supply connected to Neutral Line (Common) Power Output: FOUT1 Power Output: FOUT2 Direction Indication: DIR 5V DC Supply Voltage 0V DC Supply Voltage Phase 1 (Direction indicated on PCB) Phase 2 (Direction indicated on PCB) Phase 3 (Direction indicated on PCB) FOUT2 Frequency select Refer to Table in part 2
PL6.1 PL6.2 PL6.3 PL4 CT1 CT2 CT3 PGM0 PGM1
PM9105AP
PM9105AP PM9105AP
PA9605AP
2/6
sames
PA9605AP FUNCTIONAL DESCRIPTION 1. Interface Board The PA9605AP interface adaptor board (see Fig. 1) allows the connection of a SA9605APA (DIP-20) device to an evaluation board of type PM9105AP. This Interface Boar...
Similar Datasheet