DatasheetsPDF.com

TGL41-33A Dataheets PDF



Part Number TGL41-33A
Manufacturers Microsemi Corporation
Logo Microsemi Corporation
Description 500 Watt Transient Voltage Suppressor
Datasheet TGL41-33A DatasheetTGL41-33A Datasheet (PDF)

TGL41-6.8 thru TGL41-200CA 500 Watt Transient Voltage Suppressor SCOTTSDALE DIVISION DESCRIPTION This series of 500 W Transient Voltage Suppressors (TVSs) provides the highest level of Peak Pulse Power (PPP) in the industry for the DO-213AB size MELF package. These PPP levels offer protection from switching transients, induced RF, secondary lightning, as well as ESD or EFT where these devices are also compliant to IEC61000-4-2 and IEC61000-4-4. In addition to unidirectional TVS configurations, .

  TGL41-33A   TGL41-33A



Document
TGL41-6.8 thru TGL41-200CA 500 Watt Transient Voltage Suppressor SCOTTSDALE DIVISION DESCRIPTION This series of 500 W Transient Voltage Suppressors (TVSs) provides the highest level of Peak Pulse Power (PPP) in the industry for the DO-213AB size MELF package. These PPP levels offer protection from switching transients, induced RF, secondary lightning, as well as ESD or EFT where these devices are also compliant to IEC61000-4-2 and IEC61000-4-4. In addition to unidirectional TVS configurations, this series also offers bidirectional options with C or CA suffix. Its configuration in a MELF package prevents lead damage to terminals and also reduces inductive parasitics for minimal transient voltage overshoots. APPEARANCE WWW. Microsemi . C O M DO-213AB IMPORTANT: For the most current data, consult MICROSEMI’s website: http://www.microsemi.com FEATURES • • • • • • Economical series for 500 Watt Surface Mount transient voltage suppressor. Available in Both Unidirectional and Bidirectional Construction. Bidirectional has a C or CA suffix. 6.8 to 200 Volts Available. 500 Watts Peak Power Dissipation. Fast Response Time: Subnanosecond Response (Unipolar) or 5.0 ns (Bipolar). Plastic package has flame retardant epoxy meeting UL94V-0 • • • • APPLICATIONS / BENEFITS For Surface Mount Applications Protection from switching transients, induced RF, secondary lightning, as well as ESD, and EFT per IEC 61000-4-2 and IEC 6100-4-4 Very low inductive parasitics with minimal Ldi/dt voltage overshoots for fast-rise-time transients Robust package for pick-and-place handling MAXIMUM RATINGS @ 25oC* • • • • • • Peak Pulse Power Dissipation (P PP) - 500 W (Note 1 & 5). Peak Forward Surge Current (IFSM) - 40 A (Note 3) Peak Pulse Current (IPP) at 10/1000 µs waveform see Table 1 (Note 1) Steady-State Power Dissipation, P (AV) - 3.0W (Note 2, 4) Operating and Storage temperatures, TOP, TSTG – o o (-55 C to +150 C) Thermal Resistance junction to end cap (R? JEC) – o 15 C/W 1. 2. 3. 4. 5. MECHANICAL AND PACKAGING • • • • • Molded epoxy package meets UL94V-0 End-Cap terminals solderable per MIL-STD-750, o Method 2026 (max 260 C for 10 seconds. Polarity is indicated by cathode band. Bidirectional devices have no polarity band. Body marked with P/N without TGL41 prefix. Weight: 0.06 grams (approximate) Tape and Reel packaging per EIA-481-2 with 12 mm tape with 5000 per 13 inch reel. • TGL41-6.8 thru 200CA * Unless otherwise specified. NOTES: Non-repetitive current pulse, per Figure 3 and derated above TA = 25 C per Figure 2. 2 Mounted on 4.0 mm copper pads to each terminal. (See Figure 3) 8.3 ms single half-sine wave duty cycle = 4 pulses per minute max. Peak forward voltage at 40 A is 3.5 volts (unipolar only) o o Derate linearly above 100 C to zero at 150 C for dc steady-state power. Also see Figure 2 for transient derating. Peak pulse current waveform is 10/1000 µs, with maximum duty cycle of 0.01%. (See Figure 4) o Copyright © 2003 01-29-2003 REV A Microsemi Sc.


TGL41-33A TGL41-33A TGL41-36


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)