SAW Resonator
tfr433m.doc
version 1.0
16.08.2002
VI TELEFILTER
Measurement condition
Ambient temperature: 23 Input power level: 10 ...
Description
tfr433m.doc
version 1.0
16.08.2002
VI TELEFILTER
Measurement condition
Ambient temperature: 23 Input power level: 10 Terminating Impedance at fc*: for input: 50 for output: 50 °C dBm Ω || 0 pF Ω || 0 pF
SAW Resonator Specification
TFR 433M
1/5
Characteristics
Remark:
The minimum of the pass band attenuation amin is defined as the insertion loss ae. The centre frequency fc is the frequency of the minimum of the passband attenuation amin. The tolerance for the resonant frequency also includes a centre frequency shift due to the temperature coefficient of frequency TCf in the operating temperature range and a production tolerance for the resonant frequency fR.
Data
Insertion loss (Reference level) Resonant frequency Parallel capacitance Motional resistance Motional inductance Motional capacitance Unloaded quality factor Operating temperature range Storage temperature range Temperature coefficient *** Frequency aging ** Phase IfAI
TC
typ. value
ae = amin 1,3 dB
tolerance/limit
max. 1,8 dB
fR C0 R1 L1 C1 Qu
433,820 MHz 3,0 13,96 61,4 2,2 1199 - 0,036 ppm/K² ppm/yr pF Ω µH fF
± 75 -
kHz
- 10°C... + 70 °C - 30°C... + 85 °C
10 ϕ
-20 ..... + 20 °
*) The terminating impedances depend on parasitics and q-values of matching elements and the board used, and are to be understood as reference values only. Should there be additional questions, do not hesitate to ask for an application note or contact our design team. **) Frequency aging is the change in fR with time. Typica...
Similar Datasheet