IC card interface
INTEGRATED CIRCUITS
DATA SHEET
TDA8004AT IC card interface
Preliminary specification File under Integrated Circuits, IC...
Description
INTEGRATED CIRCUITS
DATA SHEET
TDA8004AT IC card interface
Preliminary specification File under Integrated Circuits, IC02 2000 Feb 29
Philips Semiconductors
Preliminary specification
IC card interface
FEATURES 3 or 5 V supply for the IC (GND and VDD) Step-up converter for VCC generation (separately powered with a 5 V ±10% supply, VDDP and PGND) 3 specific protected half duplex bidirectional buffered I/O lines (C4, C7 and C8) VCC regulation (5 or 3 V ±5% on 2 × 100 nF or 1 × 100 nF and 1 × 220 nF multilayer ceramic capacitors with low ESR, ICC < 65 mA at 4.5 V < VDDP < 6.5 V, current spikes of 40 nAs up to 20 MHz, with controlled rise and fall times, filtered overload detection approximately 90 mA) Thermal and short-circuit protections on all card contacts Automatic activation and deactivation sequences (initiated by software or by hardware in the event of a short-circuit, card take-off, overheating or supply drop-out) Enhanced ESD protection on card side (>6 kV) 26 MHz integrated crystal oscillator Clock generation for the card up to 20 MHz (divided by 1, 2, 4 or 8 through CLKDIV1 and CLKDIV2 signals) with synchronous frequency changes Non-inverted control of RST via pin RSTIN ISO 7816, GSM11.11 and EMV (payment systems) compatibility Supply supervisor for spikes killing during power-on and power-off One multiplexed status signal OFF. ORDERING INFORMATION TYPE NUMBER TDA8004AT PACKAGE NAME SO28 DESCRIPTION plastic small outline package; 28 leads; ...
Similar Datasheet