Single LIN Bus Transceiver
TH8080
Single LIN Bus Transceiver
Features and Benefits
Single wire LIN transceiver Compatible to LIN Protocol Specifica...
Description
TH8080
Single LIN Bus Transceiver
Features and Benefits
Single wire LIN transceiver Compatible to LIN Protocol Specification, Rev. 1.1 Compatible to ISO9141 functions Up to 20 kbps bus speed Low RFI due to slew rate control Fully integrated receiver filter Protection against load dump, jump start Bus terminals proof against short-circuits and transients in the automotive environment Very low (30 µA) typical power consumption in recessive state and therefore no sleep mode necessary Thermal overload and short circuit protection High impendance Bus pin in case of loss of ground and undervoltage condition 8-pin SOIC ±4kV ESD protection on Bus pin
RxD N.C. VCC TxD 1 2 8 7 N.C. VS BUS GND
Pin Diagram SOIC8NB
TH8080
3 4 6 5
Ordering Information
Part No. TH8080 JDC Temperature Range -40ºC...125ºC Package SOIC8, 150mil
General Description
The TH8080 is a physical layer device for a single wire data link capable of operating in applications where high data rate is not required and a lower data rate can achieve cost reductions in both the physical media components and in the microprocessor which use the network. The TH8080 is designed in accordance to the physical layer definition of the LIN Protocol Specification , Rev. 1.1 . The IC furthermore can be used in ISO9141 systems. Because of the very low current consumption of the TH8080 in the recessive state it’s particularly suitable for ECU applications with hard standby current requirements , whereby no sleep/wake up control due to...
Similar Datasheet