DatasheetsPDF.com

TK71525 Dataheets PDF



Part Number TK71525
Manufacturers TOKO
Logo TOKO
Description LOW DROPOUT VOLTAGE REGULATOR
Datasheet TK71525 DatasheetTK71525 Datasheet (PDF)

TK715xx LOW DROPOUT VOLTAGE REGULATOR FEATURES s s s s s s s High Voltage Precision at ± 2.0% or ± 60 mV Very Low Quiescent Current Very Low Dropout Voltage Reverse Bias Protection Miniature Package (SOT-23-3) Short Circuit Protection High Ripple Rejection APPLICATIONS s s s s s s s s s Battery Powered Systems Cellular Telephones Pagers Personal Communications Equipment Portable Instrumentation Portable Consumer Equipment Radio Control Systems Toys Low Voltage Systems DESCRIPTION The TK715xx i.

  TK71525   TK71525



Document
TK715xx LOW DROPOUT VOLTAGE REGULATOR FEATURES s s s s s s s High Voltage Precision at ± 2.0% or ± 60 mV Very Low Quiescent Current Very Low Dropout Voltage Reverse Bias Protection Miniature Package (SOT-23-3) Short Circuit Protection High Ripple Rejection APPLICATIONS s s s s s s s s s Battery Powered Systems Cellular Telephones Pagers Personal Communications Equipment Portable Instrumentation Portable Consumer Equipment Radio Control Systems Toys Low Voltage Systems DESCRIPTION The TK715xx is a low dropout linear regulator housed in a small SOT-23-3 package, rated at 350 mW. An internal PNP transistor is used to achieve a low dropout voltage of 105 mV (typ.) at 50 mA load current. This device offers high precision output voltage of ± 2.0 % or ± 60 mV. The TK715xx has a very low quiescent current of 25 µA (typ.) at no load. The low quiescent current and dropout voltage make this part ideal for battery powered applications. The internal reverse bias protection eliminates the requirement for a reverse voltage protection diode, saving cost and board space. The high 64 dB ripple rejection and low noise provide enhanced performance for critical applications. TK715xxS VIN 20 P GND VOUT ORDERING INFORMATION TK715 Voltage Code SCL Tape/ Reel Code Temp. Code Package Code VIN BLOCK DIAGRAM VOUT THERMAL PROTECTION VOLTAGE CODE 19 = 1.9 V 20 = 2.0 V 21 = 2.1 V 22 = 2.2 V 23 = 2.3 V 24 = 2.4 V 25 = 2.5 V 26 = 2.6 V 27 = 2.7 V 28 = 2.8 V 29 = 2.9 V 30 = 3.0 V 31 = 3.1 V 32 = 3.2 V 33 = 3.3 V 34 = 3.4 V 35 = 3.5 V 36 = 3.6 V 37 = 3.7 V 38 = 3.8 V 39 = 3.9 V 40 = 4.0 V 41 = 4.1 V 42 = 4.2 V 43 = 4.3 V 44 = 4.4 V 45 = 4.5 V 46 = 4.6 V 47 = 4.7 V 48 = 4.8 V 49 = 4.9 V 50 = 5.0 V 60 = 6.0 V 70 = 7.0 V 80 = 8.0 V 90 = 9.0 V TEMPERATURE CODE C -30 to +80 C TAPE/REEL CODE L: Tape Left PACKAGE CODE S : SOT-23-3 + + BANDGAP REFERENCE GND January 1999 TOKO, Inc. Page 1 TK715xx ABSOLUTE MAXIMUM RATINGS (VOUT ≥ 5.0 V) Supply Voltage .............................................. -0.4 to 16 V Power Dissipation (Note 1) ................................ 350 mW Reverse Bias .............................................................. 8 V Storage Temperature (Ambient) ............... -55 to +150 °C Operating Temperature (Ambient) .............. -30 to +80 °C Max. Operating Temperature (Junction) ............... 125 °C Operating Voltage Range ............................ 1.8 to 14.0 V Junction Temperature ........................................... 150 °C Lead Soldering Temperature (10 s) ...................... 235 °C TK715xx ELECTRICAL CHARACTERISTICS (VOUT ≥ 5.0 V) Test conditions: TA = 25 °C, unless otherwise specified. SYMBOL IQ IGND VOUT Line Reg PARAMETER Quiescent Current Ground Current Output Voltage Line Regulation TEST CONDITIONS IOUT = 0 mA, VOUT ≤ 4.0 V IOUT = 0 mA, VOUT ≥ 4.1 V IOUT = 50 mA IOUT = 10 mA VIN = VOUT(TYP) + 1 V to VOUT(TYP) + 6 V IOUT = 5 to 50 mA, (Note 2) IOUT = 5 to 100 mA, (Note 2) IOUT = 50 mA VDROP Dropout Voltage IOUT = 100 mA, VOUT ≥ 2.4 V IOUT = 100 mA, VOUT < 2.4 V IOUT RR ∆VOUT / ∆T Continuous Output Current Ripple Rejection Temperature Coefficient (Notes 3,4) IOUT = 10 mA 64 35 MIN TYP 25 30 1.4 See Table 1 1.0 10 20 0.105 0.185 0.185 10 30 50 .0180 0.280 0.330 100 MAX 45 50 2.5 UNITS µA µA mA V mV mV mV V V V mA dB ppm/° C Load Reg Load Regulation Note 1: Power dissipation is 350 mW when mounted as recommended. Derate at 2.8 mW/°C for operation above 25 °C. Note 2: Refer to “Definition of Terms.” Note 3: Ripple rejection and noise voltage are affected by the value and characteristics of the capacitor used. Note 4: Ripple rejection is measured at VR = 200 mVrms, VIN = VOUT(TYP) + 2 V, IOUT = 10 mA, CL = 4.7 µF, f = 100 Hz. Gen. Note: Parameters with min. or max. values are 100% tested at TA = 25 °C. Page 2 January 1999 TOKO, Inc. TK715xx ABSOLUTE MAXIMUM RATINGS (VOUT≤ 6.0 V) Supply Voltage .............................................. -0.4 to 16 V Power Dissipation (Note 1) ................................ 350 mW Reverse Bias .............................................................. 8 V Storage Temperature (Ambient) ............... -55 to +150 °C Operating Temperature (Ambient) ..............-30 to +80 °C Max. Operating Temperature (Junction) ............... 125 °C Operating Voltage Range ............................ 2.5 to 14.0 V Junction Temperature ........................................... 150 °C Lead Soldering Temperature (10 s) ...................... 235 °C TK715xx ELECTRICAL CHARACTERISTICS (VOUT ≤ 6.0 V) Test conditions: TA = 25 °C, unless otherwise specified. SYMBOL IQ IGND VOUT L in e R e g PARAMETER Quiescent Current Ground Current Output Voltage Line Regulation TEST CONDITIONS IOUT = 0 mA IOUT = 50 mA IOUT = 10 mA VIN = VOUT(TYP) + 1 V to VOUT(TYP) + 6 V or Max 14 V IOUT = 5 to 50 mA, (Note 2) IOUT = 5 to 100 mA, (Note 2) VDROP IOUT RR ∆VOUT / ∆T Dropout Voltage Continuous Output Current Ripple Rejection Temperature Coefficient (Notes 3,4) IOUT = 10 m.


TK71524AS TK71525 TK71525AS


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)