STEP-UP VOLTAGE CONVERTER WITH VOLTAGE MONITOR
TK65015
FEATURES
s s s s s s s s s 0.9 V Operation Very Low Quiescent Current Internal Bandgap Reference High Efficiency...
Description
TK65015
FEATURES
s s s s s s s s s 0.9 V Operation Very Low Quiescent Current Internal Bandgap Reference High Efficiency Low Output Ripple Microprocessor Reset Output Laser-Trimmed Output Voltage Undervoltage Lockout Regulation by Pulse Burst Modulation (PBM) s s s s s s s
STEP-UP VOLTAGE CONVERTER WITH VOLTAGE MONITOR APPLICATIONS
Battery Powered Systems Cellular Telephones Pagers Personal Communications Equipment Portable Instrumentation Portable Consumer Equipment Radio Control Systems
DESCRIPTION
The TK65015 Low Power Step-Up DC-DC converter is designed for portable battery powered systems, capable of operating from a single battery cell down to 0.9 V. The output voltage is laser-trimmed to 3.0 V. An internal detector monitors the output voltage and provides an active-low microprocessor reset signal whenever the output voltage falls below an internally preset limit. An internal undervoltage lockout circuit is utilized to prevent the inductor switch from remaining in the "ON" mode when the battery voltage is too low to permit normal operation. Special care has been taken to achieve high reliability through the use of Oxide, Nitride passivation and an additional polyimide coating. The TK65015 is available in a very small plastic surface mount package. (SOT-23L) Pulse burst modulation (PBM) is used to regulate the voltage at the VOUT pin at the IC. PBM is the process in which an oscillator signal is gated or not gated to the switch drive each period. The decision is made j...
Similar Datasheet