TLSH180P

TLSH180P TOSHIBA LED Lamp InGaAℓP Red Light Emission TLSH180P Panel Circuit Indicator · · · · · · · · · · 5 mm diameter (T1−3 / 4) InGaAℓP red LED All plastic mold type. Colorless clear lens Low drive current, high intensity red light emission Recommended forward current: IF = 1~20 mA (DC) All plastic molded lens, provides an excellent on−off contrast ratio. Fast response time, capable of pulse operation. High power luminous intensity Without stand−offs Applications: Suitable for outdoor message signboard, safety equipment. Unit in mm Maximum Ratings (Ta = 25°C) Characteristic Forward current (DC) Reverse voltage Power dissipation Operating temperature range Storage temperature range Symbol IF VR PD Topr Tstg Rating 50 4 125 -30~85 -40~120 Unit mA V mW °C °C JEDEC EIAJ TOSHIBA Weight: 0.31 g ― ― 4−6J1 Electrical And Optical Characteristics (Ta = 25°C) Characteristic Forward voltage Reverse current Luminous intensity TLSH180P TLSH180P(VW) Symbol VF IR IV λP ∆λ λd IF = 20mA VR = 4V IF = 20mA IF = 20mA IF = 20mA IF = 20mA (Note) Test Condition Min — — 2720 4760 — — — Typ. 2.1 — 10000 — 623 15 613 Max 2.5 50 — 23000 — — — Unit V µA mcd nm nm nm Peak emission wavelength Spectral line half width Dominant wavelength (Note): Lamps are classified into the following ranks according to their luminous intensity. Measurement tolerance for each limit is ±15%. U: 3200-6400 mcd, V: 5600-11200 mcd, W: 8500-23000 mcd. 1 2002-09-25 TLSH180P Precaution · · · Please be careful of the fo...