TOSHIBA LED Lamp InGaAP Red Light Emission
TLRH262
TOSHIBA LED Lamp InGaAℓP Red Light Emission
TLRH262
Panel Circuit Indicator
· · · · · · · · · 3.1 mm diameter (...
Description
TLRH262
TOSHIBA LED Lamp InGaAℓP Red Light Emission
TLRH262
Panel Circuit Indicator
· · · · · · · · · 3.1 mm diameter (T1) InGaAℓP red LED All plastic mold type. Colorless clear lens Low drive current, high intensity red light emission Recommended forward current: IF = 1~20 mA (DC) All plastic molded lens, provides an excellent on−off contrast ratio. Fast response time, capable of pulse operation. High power luminous intensity Applications: Suitable for backlighting. Unit in mm
Maximum Ratings (Ta = 25°C)
Characteristic Forward current (DC) Reverse voltage Power dissipation Operating temperature range Storage temperature range Symbol IF VR PD Topr Tstg Rating 50 4 125 -30~85 -40~120 Unit mA V mW °C °C
JEDEC EIAJ TOSHIBA Weight: 0.14 g
Min ¾ ¾ (Note) 85 85 ¾ ¾ ¾ Typ. 1.9 ¾ 220 ¾ 644 18 630
― ― 4−3H1
Electrical And Optical Characteristics (Ta = 25°C)
Characteristic Forward voltage Reverse current Luminous intensity TLRH262 TLRH262 (NP) Symbol VF IR IV λP ∆λ λd Test Condition IF = 20 mA VR = 4 V IF = 20 mA IF = 20 mA IF = 20 mA IF = 20 mA
Max 2.5 50 ¾ 414 ¾ ¾ ¾
Unit V µA mcd nm nm nm
Peak emission wavelength Spectral line half width Dominant wavelength
(Note): Lamps are classified into the following ranks according to their luminous intensity. Measurement tolerance for each limit is ±15%. N: 100-200 mcd, P: 180-360 mcd, Q: 320-640 mcd.
1
2002-09-25
TLRH262
Precaution
· · · Please be careful of the followings Soldering temperature: 260°C max Soldering time : 3 s max
...
Similar Datasheet