7A H-Bridge
7 A H-Bridge for DC-Motor Applications Data Sheet
TLE 6209 R
1 Overview
1.1 Features
• Delivers up to 6 A continuous...
Description
7 A H-Bridge for DC-Motor Applications Data Sheet
TLE 6209 R
1 Overview
1.1 Features
Delivers up to 6 A continuous and 7 A peak current
Optimized for DC motor management applications
Very low RDS ON of typ. 150 mΩ @ 25 °C per switch Operates at supply voltages of up to 40V
Overvoltage Protection against transients up to 45 V
Outputs fully short circuit protected
Standard SPI-Interface, daisy chain capability
PG-DSO-20-37, -65
Adjustable chopper current regulation of up to 7 A
Temperature monitor with prewarning, warning and shutdown
Over- and Undervoltage-Lockout
Open load detection
Detailed load failure diagnosis by SPI
Minimized power dissipation due to active free-wheeling
Low EMI due to voltage slope regulation
Very low current consumption (typ. 20 μA @ 25 °C) in stand-by (Inhibit) mode
Enhanced power PG-DSO-Package
Green Product (RoHS compliant)
AEC Qualified
Type TLE 6209 R
Package PG-DSO-20-37, -65
Functional Description
The TLE 6209 R is an integrated power H-Bridge with D-MOS output stages for driving bidirectional loads such as DC-Motors. The design is based on Infineons Smart Power Technology SPT which allows bipolar, CMOS and power D-MOS devices on the same monolithic circuit.
Operation modes forward (cw), reverse (ccw) and brake are invoked by two control pins PWM and DIR. Protection and a reliable diagnosis of overcurrent, openload, short-circuit to ground, to the supply voltage or across the load are i...
Similar Datasheet