DC Motor Driver for Servo Driver Applications
DC Motor Driver for Servo Driver Applications
TLE 4209
1
1.1
Overview
Features
• Optimized for headlight beam contro...
Description
DC Motor Driver for Servo Driver Applications
TLE 4209
1
1.1
Overview
Features
Optimized for headlight beam control applications Delivers up to 0.8 A Low saturation voltage; typ. 1.2 V total @ 25 °C; 0.4 A Output protected against short circuit Overtemperature protection with hysteresis Over- and undervoltage lockout No crossover current Internal clamp diodes
1.2
Description
The TLE 4209 is a fully protected H-Bridge Driver designed specifically for automotive headlight beam control and industrial servo control applications. The part is built using Infineons bipolar high voltage power technology DOPL. The device is available in a P-DIP-8-4 package. The servo-loop-parameter pos.- and neg. Hysteresis, pos.- and neg. deadband and angle-amplification are programmable with external resitors. An internal window-comparator controls the input line. In the case of a fault condition, like short circuit to GND, short circuit to supply-voltage, and broken wire, the TLE 4209 stops the motor immediately (brake condition). Furthermore the built in features like over- and undervoltage-lockout, short-circuitprotection and over-temperature-protection will open a wide range of automotive- and industrial applications.
Type TLE 4209
Data Sheet 1
Package P-DIP-8-4
2000-09-05
TLE 4209
Overview 1.3 Pin No. P-DIP-8-4 1 2 3 4 5 6 7 8 Pin Definitions and Functions Symbol FB HYST OUT1 Function Feedback Input Hysteresis I/O Power Output 1 Power Supply Voltage Power Output 2 Grou...
Similar Datasheet