Sensitive gate 4A SCRs
Features
On-state RMS current: 4 A Repetitive peak off-state voltage (VDRM,
VRRM) 600 V Triggering gate current, I...
Description
Features
On-state RMS current: 4 A Repetitive peak off-state voltage (VDRM,
VRRM) 600 V Triggering gate current, IGT 0.2 mA
TS420
Sensitive gate 4 A SCRs
Datasheet - production data
Description
Thanks to highly sensitive triggering levels, the device is suitable for all applications where the available gate current is limited, such as motor control for hand tools, kitchen aids, overvoltage crowbar protection for low power supplies among others.
Available in through-hole and surface-mount packages, they provide an optimized performance in a limited space area.
Table 1: Device summary
Order code
Sensitivity
Package
TS420-600B TS420-600H
0.2 mA
DPAK IPAK
TS420-600T
TO-220AB
October 2017
DocID5203 Rev 6
This is information on a product in full production.
1/14
www.st.com
Characteristics
TS420
1 Characteristics
Symbol IT(RMS) IT(AV)
ITSM
I2t
dl/dt
IGM PG(AV) VRGM
Tstg Tj
Table 2: Absolute ratings (limiting values)
Parameter
RMS on-state current (180 ° conduction angle)
Average on-state current (180 ° conduction angle)
Non repetitive surge peak on-state current
tp = 8.3 ms tp = 10 ms
I2t value for fusing
tp = 10 ms
Critical rate of rise of on-state current
IG = 10 mA, dlG / dt = 0.1 A/µs
f = 60 Hz
Peak gate current
tp = 20 µs
Average gate power dissipation
TC = 115°C TC = 115°C Tj initial = 25 °C Tj = 25 °C
Tj = 125 °C
Maximum peak reverse gate voltage Storage junction temperature range
Maximum operating junction temperature
Value 4 2.5 ...
Similar Datasheet