Dual Output Flasher
U2044B
Dual Output Flasher
Description
The integrated circuit U2044B is used in relay controlled automotive flashers. Wi...
Description
U2044B
Dual Output Flasher
Description
The integrated circuit U2044B is used in relay controlled automotive flashers. With two output stages each side of the vehicle is controlled separately. A left and a right direction indicator input with only a small control current makes switch contacts for small loads possible. The separate hazard warning input simplifies the construction of the hazard switch. Lamp outage is indicated by frequency doubling during direction mode. Thanks to the extreme low current consumption U2044B can be connected to the battery directly.
Features
D Temperature and supply voltage compensated
flashing frequency
D Frequency doubling indicates lamp outage D Two relay driver outputs with high current-carrying
capacity and low saturation voltage
D Very low susceptibility to EMI D Protection according to ISO/TR7637/1 level 4 D Extremly low current consumption < 10 mA
(@switches open)
D Minimum lamp load for flasher operation:
w1 W
Package DIP14 SO14
D Reverse polarity protection D Three control inputs: left, right and hazard warning
Ordering Information
Extended Type Number U2044B U2044B-FP Remarks
Pin Description
Pin 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Symbol OSC SIL SIR SIHW VS CR1 CR2 LD VS GND OR1 VS OR2 OSC Function Oscillator Start input left Start input right Start input hazard warning VS Control input relay 1 Control input relay 2 Lamp failure detection VS IC ground Output relay 1 VS Output relay 2 Oscillator
OSC SIL SIR SIHW VS CR1 CR2 1 2 3 4 5...
Similar Datasheet