SDH/SONET STM1/OC3 and STM4/OC12 transceiver
INTEGRATED CIRCUITS
DATA SHEET
TZA3033 SDH/SONET STM1/OC3 transimpedance amplifier
Objective specification File under I...
Description
INTEGRATED CIRCUITS
DATA SHEET
TZA3033 SDH/SONET STM1/OC3 transimpedance amplifier
Objective specification File under Integrated Circuits, IC19 1998 Jul 08
Philips Semiconductors
Objective specification
SDH/SONET STM1/OC3 transimpedance amplifier
FEATURES Low equivalent input noise, typically 1 pA/√Hz Wide dynamic range, typically 0.25 µA to 1.6 mA Differential transimpedance of 117 kΩ Bandwidth minimum 150 MHz Differential outputs On-chip AGC (Automatic Gain Control) No external components required Single supply voltage from 3.0 to 5.5 V Bias voltage for PIN diode Pin compatible with SA5223. ORDERING INFORMATION TYPE NUMBER TZA3033T TZA3033U PACKAGE NAME SO8 naked die DESCRIPTION plastic small outline package; 8 leads; body width 3.9 mm die in waffle pack carriers; die dimensions 0.960 × 1.210 mm APPLICATIONS
TZA3033
Digital fibre optic receiver in short, medium and long haul optical telecommunications transmission systems or in high speed data networks Wideband RF gain block. GENERAL DESCRIPTION The TZA3033 is a low-noise transimpedance amplifier with AGC designed to be used in STM1/OC3 fibre optic links. It amplifies the current generated by a photo detector (PIN diode or avalanche photodiode) and converts it to a differential output voltage.
VERSION SOT96-1 −
BLOCK DIAGRAM
handbook, full pagewidth
AGC(1)
VCC 8 (13, 14)
VCC 1 nF DREF 1 (1) 65 pF IPhoto 3 (5) A1 low noise amplifier 2 kΩ GAIN CONTROL
(15)
peak detector
(12) 7 A2 single-end...
Similar Datasheet