US3021M
5 BIT PROGRAMMABLE SYNCHRONOUS BUCK PLUS TRIPPLE LDO CONTROLLER
PRELIMINARY DATASHEET
FEATURES
Provides Single ...
US3021M
5 BIT PROGRAMMABLE SYNCHRONOUS BUCK PLUS TRIPPLE LDO CONTROLLER
PRELIMINARY DATASHEET
FEATURES
Provides Single Chip Solution for Vcore, GTL+ ,AGP Bus, and 1.8V Automatic Voltage Selection for AGP slot Vddq supply Linear
regulator controller on board for 1.8V Designed to meet Intel Latest VRM specification for next generation micrprocessors On board DAC programs the output voltage from 1.3V to 3.5V Linear
regulator controller on board for 1.5V GTL+ supply Loss less Short Circuit Protection for all outputs Synchronous operation allows maximum efficiency Patented architecture allows fixed frequency operation as well as 100% duty cycle during dynamic load Minimum part count Soft Start High current totem pole driver for direct driving of the external Power MOSFET Power Good function Monitors all Outputs OVP Circuitry Protects the Switcher Output and generates a Fault output
DESCRIPTION
The US3021M controller IC is specifically designed to meet Intel specification for next generation microprocessor applications requiring multiple on board
regulators . The US3021M provides a single chip controller IC for the Vcore , 3LDO controllers, one with the automatic select pin that connects to the TYPE DETECT pin of the AGP slot for the AGP Vddq supply, one for GTL+ and the other for the 1.8V chip set
regulator as required for the next generation PC applications. The US3021M uses N ch MOSFET as pass
transistor for Vout2(Vddq), Vout3(1.5V) and Vout4(1.8V). No external resistor divide...