3.3 VOLT 16M x 64 using 8M x 16 PC100 UNBUFFERED SDRAM MODULE
MOSEL VITELIC
V436516R04VATG-10PC 3.3 VOLT 16M x 64 (using 8M x 16) PC100 UNBUFFERED SDRAM MODULE
Description
PRELIMIN...
Description
MOSEL VITELIC
V436516R04VATG-10PC 3.3 VOLT 16M x 64 (using 8M x 16) PC100 UNBUFFERED SDRAM MODULE
Description
PRELIMINARY
Features
s 168 Pin Unbuffered 16, 777, 216 x 64 bit Oganization SDRAM DIMM s Utilizes High Performance 128 Mbit, 8M x 16 SDRAM in TSOPII-54 Packages s Fully PC Board Layout Compatible to INTEL’S Rev 1.0 Module Specification s Single +3.3V (± 0.3V) Power Supply s Programmable CAS Latency, Burst Length, and Wrap Sequence (Sequential & Interleave) s Auto Refresh (CBR) and Self Refresh s All Inputs, Outputs are LVTTL Compatible s 4096 Refresh Cycles every 64 ms s Serial Present Detect (SPD) s SDRAM Performance
The V436516R04VATG-10PC memory module is organized 16, 777, 216 x 64 bits in a 168 pin dual in line memory module (DIMM). The 16M x 64 memory module uses 8 Mosel-Vitelic 8M x 16 SDRAM. The x64 modules are ideal for use in high performance computer systems where increased memory density and fast access times are required.
Key Component Timing Parameters
tCK tAC tAC Clock Frequency (max.) Clock Access Time CAS Latency = 3 Latency = 2
-8PC
125 6
Units
MHz ns
6
ns
s Module Frequency vs AC Parameter
Frequency
V436516R04VATG-10PC 100 MHz (PC)
CL (CAS Latency)
3 2
tRCD
2 2
tRP
2 2
tRC
7 7
Unit
CLK CLK
V436516R04VATG-10PC Rev. 1.1 February 2001
1
MOSEL VITELIC
Pin Configurations (Front Side/Back Side)
Pin 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 Front VSS I/O1 I/O2 I/O3 I/O4 VCC I/O5 I/O6 I/O7 I/O8 I/O9 VSS I/O...
Similar Datasheet