DatasheetsPDF.com

V23826-K15-C373 Dataheets PDF



Part Number V23826-K15-C373
Manufacturers Infineon Technologies
Logo Infineon Technologies
Description Single Mode 1300 nm 1.0625 GBd Fibre Channel 1.3 Gigabit Ethernet 1x9 Transceiver
Datasheet V23826-K15-C373 DatasheetV23826-K15-C373 Datasheet (PDF)

Fiber Optics Single Mode 1300 nm 1.0625 GBd Fibre Channel 1.3 Gigabit Ethernet 1x9 Transceiver V23826-K15-Cxx/Cxxx Features • Compliant with Fibre Channel and Gigabit Ethernet standard • Meets mezzanine standard height of 9.8 mm • Compact integrated transceiver unit with – MQW laser diode transmitter – InGaAs PIN photodiode receiver – Duplex SC receptacle • Class 1 FDA and IEC laser safety compliant • Single power supply (5 V or 3.3 V) • Signal detect indicator (PECL and TTL version) • PECL d.

  V23826-K15-C373   V23826-K15-C373


Document
Fiber Optics Single Mode 1300 nm 1.0625 GBd Fibre Channel 1.3 Gigabit Ethernet 1x9 Transceiver V23826-K15-Cxx/Cxxx Features • Compliant with Fibre Channel and Gigabit Ethernet standard • Meets mezzanine standard height of 9.8 mm • Compact integrated transceiver unit with – MQW laser diode transmitter – InGaAs PIN photodiode receiver – Duplex SC receptacle • Class 1 FDA and IEC laser safety compliant • Single power supply (5 V or 3.3 V) • Signal detect indicator (PECL and TTL version) • PECL differential inputs and outputs • Process plug included • Input Signal Monitor (DC/DC-Version) • Performance exceeds FC 100-SM-LL-I • Wave solderable and washable with process plug inserted • For distances of up to 10 km on single mode fiber, and up to 550 m on multimode fiber (use offset jumper as specified in IEEE 802.3) Part Number V23826-K15-C13 V23826-K15-C313 V23826-K15-C53 V23826-K15-C353 V23826-K15-C631) V23826-K15-C3631) V23826-K15-C73 V23826-K15-C373 Add Suffix to PIN -C3 -D3 1) Voltage Signal Detect 5V PECL 3.3 V 5V TTL 3.3 V 5V PECL 3.3 V 5V PECL 3.3 V Shield Options Metallized cover, forward springs Metallized cover, backward springs Input AC AC DC AC Output DC AC DC AC Standard version Data Sheet 1 2000-03-09 V23826-K15-Cxx/Cxxx Pin Configuration Pin Configuration Top vi ew Rx Tx 1 2 3 4 5 6 7 8 9 q q q q q q q q q Figure 1 Pin Description Pin No. 1 2 3 4 Symbol RxVEE RD RDn RxSD PECL Output active high (TTL C53/353) Power Supply PECL Input Power Supply Mech. Support Rx Signal Detect Rx 3.3 V/5 V Tx 3.3 V/5 V Tx Input Data Tx Ground Support Inverted transmitter input data Transmitter input data Negative power supply, normally ground Not connected Level/Logic Power Supply PECL Output Function Rx Ground Description Negative power supply, normally ground Inverted receiver output data High level on this output shows there is an optical signal Positive power supply, 3.3 V/5 V Rx Output Data Receiver output data 5 6 7 8 9 RxVCC TxVCC TxDn TxD TxVEE S1/S2 Case Data Sheet 2 2000-03-09 V23826-K15-Cxx/Cxxx Description Description The Infineon single mode transceiver is based on the Physical Medium Depend (PMD) sublayer and baseband medium, type 1000BASE-LX (Long Wavelength Laser) (IEEE 802.5) and complies with the Fibre Channel Physical and Signaling Interface (FCPH), ANSI XSI TT Fibre Channel Physical Standard Class 100-SM-LL-I, latest Revision. The appropriate fiber optic cable is 9 µm (mode field diameter) single mode fiber (up to 10 km) with Duplex SC connector. The Infineon single mode transceiver is a single unit comprised of a transmitter, a receiver, and an SC receptacle. This design frees the customer from many alignment and PC board layout concerns. The module is designed for low cost LAN, WAN and Gigabit Ethernet applications. It can be used as the network end device interface in mainframes, workstations, servers, and storage devices, and in a broad range of network devices such as bridges, routers, intelligent hubs, and local and wide area switches. This transceiver operates at 1.0625 and 1.3 Gbit/s from a single power supply (+5 V or 3.3 V). The full differential data inputs and outputs are PECL compatible. Functional Description This transceiver is designed to transmit serial data via single mode or multimode cable. Si gnalM oni t orand Aut om at i c Shut D ow n LEN TD TD LaserCoupl i ng U ni t e/ o Laser SM * Laser I Dr i ver Pow er Cont r ol o/ e Si ngl e M ode Fi ber M oni t or RX Coupl i ng U ni t RD RD SD o/ e Recei ver *D C/ D C Ver si on onl y Figure 2 Functional Diagram The receiver component converts the optical serial data into PECL compatible electrical data (RD and RDnot). The Signal Detect (SD, active high) shows whether an optical signal is present. The transmitter converts electrical PECL compatible serial data (TD and TDnot) into optical serial data. Data Sheet 3 2000-03-09 V23826-K15-Cxx/Cxxx Description The following versions are available: 1 AC/DC Transceiver: Tx is AC coupled. Differential 100 W load. Rx has standard PECL output and is DC coupled. 2 AC/AC TTL Transceiver: Tx and Rx are AC coupled. Tx has differential 100 W load. Signal Detect is TTL compatible. 3 DC/DC Transceiver: Standard PECL inputs and outputs Tx and Rx are DC coupled. This version contains an Input Signal Monitor (ISM) which switches off the transceiver if a continuous low level is applied at Data Input. 4 AC/AC PECL Transceiver: Tx and Rx are AC coupled. Tx has differential 100 W load. Signal Detect is PECL compatible. The transmitter contains a laser driver circuit that drives the modulation and bias current of the laser diode. The currents are controlled by a power control circuit to guarantee constant output power of the laser over temperature and aging. The power control uses the output of the monitor PIN diode (mechanically built into the laser coupling unit) as a controlling signal, to prevent the laser power from exceeding the operating limits. Single fault condition i.


V23826-K15-C363 V23826-K15-C373 V23826-K15-C53


@ 2014 :: Datasheetspdf.com :: Semiconductors datasheet search & download site.
(Privacy Policy & Contact)