VND810SP

® VND810SP DOUBLE CHANNEL HIGH SIDE DRIVER TYPE VND810SP (*) Per each channel RDS(on) 160 mΩ (*) IOUT 3.5 A (*) VCC 36 V CMOS COMPATIBLE INPUTS OPEN DRAIN STATUS OUTPUTS s ON STATE OPEN LOAD DETECTION s OFF STATE OPEN LOAD DETECTION s SHORTED LOAD PROTECTION s UNDERVOLTAGE AND OVERVOLTAGE SHUTDOWN s PROTECTION AGAINST LOSS OF GROUND s VERY LOW STAND-BY CURRENT s REVERSE BATTERY PROTECTION (**) s s 10 1 PowerSO-10™ ORDER CODES PACKAGE TUBE T&R PowerSO-10™ VND810SP VND810SP13TR DESCRIPTION The VND810SP is a monolithic device made by using STMicroelectronics VIPower M0-3 Technology, intended for driving any kind of load with one side connected to ground. Active VCC pin voltage clamp protects the device against low energy spikes (see ISO7637 transient compatibility table). Active current limitation BLOCK DIAGRAM combined with thermal shutdown and automatic restart protects the device against overload. The device detects open load condition both in on and off state. Output shorted to VCC is detected in the off state. Device automatically turns off in case of ground pin disconnection. Vcc Vcc CLAMP OVERVOLTAGE UNDERVOLTAGE GND INPUT1 STATUS1 CLAMP 1 OUTPUT1 DRIVER 1 CLAMP 2 CURRENT LIMITER 1 OVERTEMP. 1 LOGIC OPENLOAD ON 1 CURRENT LIMITER 2 DRIVER 2 OUTPUT2 INPUT2 OPENLOAD OFF 1 STATUS2 OPENLOAD OFF 2 OVERTEMP. 2 OPENLOAD ON 2 (**) See application schematic at page 8 July 2002 1/18 1 VND810SP ABSOLUTE MAXIMUM RATING Symbol VCC - VCC - IGND IOUT - IOUT IIN Ist...