OCTAL HIGH SIDE DRIVER FOR THE AUTOMATION MARKET
®
VN808
OCTAL CHANNEL HIGH SIDE DRIVER
PRELIMINARY DATA
TYPE VN808 www.DataSheet4U.com
s s
RDS(on) 160 mΩ
IOUT 0.7 A...
Description
®
VN808
OCTAL CHANNEL HIGH SIDE DRIVER
PRELIMINARY DATA
TYPE VN808 www.DataSheet4U.com
s s
RDS(on) 160 mΩ
IOUT 0.7 A
VCC 45V
VCC/2 COMPATIBLE INPUT JUNCTION OVERTEMPERATURE PROTECTION s CASE OVERTEMPERATURE PROTECTION FOR THERMAL INDEPENDENCE OF THE CHANNELS s CURRENT LIMITATION s SHORTED LOAD PROTECTION s UNDERVOLTAGE SHUTDOWN s PROTECTION AGAINST LOSS OF GROUND s VERY LOW STAND-BY CURRENT s COMPLIANCE TO 61000-4-4 IEC TEST UP TO 4.4KV (see application schematic page 7) DESCRIPTION The VN808 is a monolithic device designed in STMicroelectronics VIPower M0-3 Technology, intended for driving any kind of load with one side connected to ground. Active current limitation combined with thermal shutdown and automatic restart, protect the device against overload. In overload condition, channel turns off and back on automatically so as to maintain junction
PowerSO-36
temperature between TTSD and TR. If this condition makes case temperature reach TCSD, overloaded channel is turned off and will restart only when case temperature has decreased down to TCR (see waveform 3 page 8). Non overloaded channels continue to operate normally. Device automatically turns off in case of ground pin disconnection. This device is especially suitable for industrial applications conform to IEC 1131 (Programmable Controllers International Standard).
BLOCK DIAGRAM
VCC UNDERVOLTAGE DETECTION
VCC CLAMP
INPUT 1 GND INPUT 2 CLAMP POWER INPUT 3 INPUT 4 CURRENT LIMITER OUTPUT 3 INPUT 5 INPUT 6 OUTPUT 1...
Similar Datasheet