APPLICATION NOTE A V A I L A B L E
3 or 4 Cell Li-Ion BATTERY PACKS
Preliminary Information Preliminary
X3100/X3101
F...
APPLICATION NOTE A V A I L A B L E
3 or 4 Cell Li-Ion BATTERY PACKS
Preliminary Information Preliminary
X3100/X3101
FEATURE Software Selectable Protection Levels and Variable Protect Detection/Release Times Integrated FET Drive Circuitry Cell Voltage and Current Monitoring 0.5% Accurate Voltage
Regulator Integrated 4kbit EEPROM Flexible Power Management with 1µA Sleep Mode Cell Balancing Control BENEFIT
4 cell / 3 cell
3 or 4 Cell Li-Ion Battery Protection and Monitor IC
Optimize protection for chosen cells to allow maximum use of pack capacity. Reduce component count and cost Simplify implementation of gas gauge Accurate voltage and current measurements Record battery history to optimize gas gauge, track pack failures and monitor system use Reduce power to extend battery life Increase battery capacity and improve cycle life battery life Using an internal analog multiplexer, the X3100 or X3101 allow battery parameters such as cell voltage and current (using a sense resistor) to be monitored externally by a separate microcontroller with A/D converter. Software on this microcontroller implements gas gauge and cell balancing functionality in software. The X3100 and X3101 contain a current sense amplifier. Selectable gains of 10, 25, 80 and 160 allow an external 10 bit A/D converter to achieve better resolution than a more expensive 14 bit converter. An internal 4kbit EEPROM memory featuring IDLock™, allows the designer to partition and “lock in” w...