Serial E2PROM
Preliminary X24C01A Information
1K
X24C01A
Serial E2PROM
DESCRIPTION
128 x 8 Bit
FEATURES
• • • • • • • •
2.7V to ...
Description
Preliminary X24C01A Information
1K
X24C01A
Serial E2PROM
DESCRIPTION
128 x 8 Bit
FEATURES
2.7V to 5.5V Power Supply Low Power CMOS —Active Current Less Than 1 mA —Standby Current Less Than 50 µA Internally Organized 128 x 8 Self Timed Write Cycle —Typical Write Cycle Time of 5 ms 2 Wire Serial Interface —Bidirectional Data Transfer Protocol Four Byte Page Write Operation —Minimizes Total Write Time Per Byte High Reliability —Endurance: 100,000 Cycles —Data Retention: 100 Years New Hardwire – Write Control Function
The X24C01A is a CMOS 1024 bit serial E2PROM, internally organized 128 x 8. The X24C01A features a serial interface and software protocol allowing operation on a simple two wire bus. Three address inputs allow up to eight devices to share a common two wire bus. Xicor E2PROMs are designed and tested for applications requiring extended endurance. Inherent data retention is greater than 100 years. Available in an eight pin DIP and SOIC package.
FUNCTIONAL DIAGRAM
(8) VCC (4) VSS (7) WC START CYCLE (5) SDA START STOP LOGIC CONTROL LOGIC SLAVE ADDRESS REGISTER +COMPARATOR XDEC E2PROM 32x32 H.V. GENERATION TIMING & CONTROL
(6) SCL (3) A2 (2) A1 (1) A0
LOAD
INC
WORD ADDRESS COUNTER R/W YDEC 8 CK PIN DOUT ACK
3841 FHD F01
DATA REGISTER
DOUT
© Xicor, 1991 Patents Pending
3841-1
1
Characteristics subject to change without notice
X24C01A
PIN DESCRIPTIONS Serial Clock (SCL) The SCL input is used to clock all data into and out of the device. Ser...
Similar Datasheet