3 Channel Laser Diode Driver
ZL40518 3 Channel Laser Diode Driver
Data Sheet Features
• • • • • • • • • • • • • Current-controlled Output Current sou...
Description
ZL40518 3 Channel Laser Diode Driver
Data Sheet Features
Current-controlled Output Current source Output Current per Channel to 250 mA Total Output Current to 300 mA Rise Time 1.0 ns, Fall Time 1.1 ns On-chip RF Oscillator External Resistor Control of Oscillator Swing and Frequency 200 to 500 MHz Oscillator Range 100 mA Maximum Oscillator Swing Single +5 V Power Supply (±10%) Low-power Consumption Common Enable, Disable Input TTL/CMOS control signals Small SS016 Package ZL40518LDG SSO16 0 ° C to +70° C Tape and Reel Ordering Information
October 2004
Applications
DVD R/RW CD R/RW
CH_R INR /ENR CH_2 IN2 /EN2
VCC
IOUT
CH_3 IN3 /EN3
RF_freq
RF RS
RF_mag
GND
OSCEN
PWR_UP
Figure 1 - Functional Block Diagram 1
Zarlink Semiconductor Inc. Zarlink, ZL and the Zarlink Semiconductor logo are trademarks of Zarlink Semiconductor Inc. Copyright 2004, Zarlink Semiconductor Inc. All Rights Reserved.
ZL40518
Data Sheet
INR IN2 GND RF IN3 /ENR /EN2 /EN3
1 2 3 4 5 6 7 8
16 15 14 13 12 11 10 9
VCC_IN VCC IOUT GND RS PWR_UP OSCEN VCC
Figure 2 - Pinout of 16 Pin SSO16 Package (Top View)
Description
The ZL40518 is a laser diode driver for high speed operation of a grounded laser diode. The driver consists of 3 controllable channels: a switchable, low noise, read channel and two switchable write channels. Write current pulses are enabled with the application of a low signal on the /EN pins. A summed output of all channels is available at the IOUT pin. Ea...
Similar Datasheet